. Stop Button Stops all wash and dry functions currently operating. . Rear Wash / Move Button Press once (o initiate a 2-minute rear wash. Press again to initiate nozzle oscillation {repetitive forward and backward nozzle movement). . Front Wash / Move Button Press once to initiate a 2-minute front wash, Press again to initiate nozzle oscillation {repetitive forward and backward nozzle movement). Strong Wash / Move Button Press once to initiate 8 2-minute strong wash.
1. ERODE DEE RATION Using the Swash: Getting Started NOTE: The seat hae 8 builtin skin conductivity sensor, The wash functions will not work unless the sensor defects someone Is seated. To override the sat sensor see instructions on page 22. Prepare for Wash Sit on the seat to ensure skin-to-seat contact on the seat sensor. ‘Warm Water Wash When ready to wash, press the Rear Wash, Front Wash, or Strong Wash button on the control panel once to initiate a wash.
Sac Lal Special Mode Operations Deodorizer i The deodorizer is defaulted to automatically turn on when seated. When the auto deodorizer Is on, the deodorize indicator fight is ON. After leaving the seat, it will automatically turn OFF after 1 minute, . To manually turn OFF the auto deodorizer, press the Deodorize button and the indicator light will turn OFF. The deodorizer will remain off until iris turned back on again by pressing the Deodorize button.
20 ERODE DEE RATION Special Mode Operation: Memory Functions User Memory Settings The Swash User 1 and User 2 memory functions allow you to program your preferred wash settings for rear, front, or strong wash cycles for two users, These settings include nozzle positioning, water pressure, water temperature, seat temperature, and move function. Follow the steps below to program and use the memory function. Programming User 1 Memory Function 1. Sit on the seat and select your wash cycle {rear, front, strong).
ABDUCT DESPERATION Expert Mode Operations Level 4 Expert Mode Operations Level 1 allows the user fo wn Eco Mode, Silent Mode, or Seat Sensor Override ON and OFF. Using the remote, follow steps 1-3 to enter, program, and exit Expert Mode Level 1. & Nozzle Cleaning for 2 seconds. Ww Nozzle Leaning Nozzle Cleaning LED starts blinking to indicate Expert Mode has been entered. ee Nozzle Tinning When Eco Mode is on, the bidet seat will automatically lower the 1. Enter Expat 2.
ABDUCT DESPERATION Expert Mode Operations Level 1 (Cont'd) 2. Programming 3. Evil Expert Expert Modes {Comte} Mode Level! Seat Sensor Override Press/hold STOP Seat Sensor Override bypasses & Nozzle Cleaning the body sensor located In the for 2 seconds. seat and allows the wash and — dry functions fo operate without #8 we Cleaning engaging skin Jo seal contact, Use with caution. Nozzle Cleaning LED stops blinking to disdain Special Mode has been exited.
ABDUCT DESPERATION Expert Mode Operations Level 2 Expert Mode Operations Level 2 allows for customizing and changing the cycle times for Rear Wash, Front Wash, Strong Wash, Warm Air Dryer, Gentle Wash, and Gentle Wash Dry Cycle. Custom programming must be performed in Expert Mode status with the seat sensor overridden and turned off, and with the seat unoccupied, Using the remote, follow steps 1-3 to enter, program, and exit Expert Mode Level 2. for 2 seconds. 8 Nozzle Cleaning 2.
24 ABDUCT DESPERATION Expert Mode Operations Level 2 (Cont'd) 2. Water Temp light blinks, gm Water Temp. 3. Continue to press Dry without releasing. % Dry 4. Press Water Temp to select new cycle time with LED light. OFF=t min Green=2 min Orange=3 min Red=5 min ge Water Temp. 5. Release to set new time. 2. Water Temp light blinks. i gl Water Temp, 3. Continue to press Gentle without releasing. Santos 4. Press Water Temp to select new cycle time with LED light. OFF=30 sec Green=1 min Orange=1.
