Installation Guide

11
INSTALLATION (cont.)
INSTALLING THE BIDET ATTACHMENT (cont.)
2. Connect Cold Water Bidet Hose to Bidet Attachment
a. Connect the open end of bidet hose to the Cold connection on the back of
the bidet attachment.
Note: If you have already installed the Hot Water Supply Cap over the hot water
supply on your PureSpa, Skip to Step 3 on Page 12. Otherwise continue with the
installation at the top of Page 12.
Step 2a
b. Make sure the adjustable brackets line
up with the holes in the toilet fixture. You
may need to move the adjustable brackets
accordingly to line up properly.
c. Replace the toilet seat on top of bidet
attachment and secure using original toilet
seat hardware. Make sure to tighten so that
the bidet attachment and seat do not move.
Step 1b
Step 1c