Installation Sheet

ManualsBrandsBrondell ManualsBathSwash Electric Bidet Seat for Round Toilets in White

Questions about installation? Call our customer service department at 888-542-3355 or visit brondell.com

Swash Bidet Toilet Seat Installation

PRODUCT INFORMATION

Dual Stainless Steel Nozzles – separate stainless steel nozzles resist soiling and bacterial

contamination for enhanced hygiene. The dual nozzle conﬁguration ensures accurate coverage for

all types of users.

Aerated Wash Spray – micro-bubbles introduced into the wash spray create a gentler, softer

wash action designed for sensitive skin. In addition, the aerated spray reduces overall water

consumption and is more eective in washing the skin.

Positionable Nozzles – each nozzle has seven dierent positions to ensure the most comfortable

and complete wash.

Ergonomic Heated Seat – with four temperature settings (High/Med/Low/O).

Night Light – an illuminating night light means no more blinding lights during midnight trips to the

bathroom.

Sturdy, “Sittable” Lid – the strong bidet seat lid will support up to 270 pounds.

Gentle Closing Seat and Lid – “slam free” gentle closing seat and lid are user friendly.

Instant and Endless Warm Water – the cutting-edge instant ceramic heating system ensures an

endless warm water stream for posterior and feminine washes.

Adjustable Water Temperature and Pressure – each wash mode (Front and Rear) has four

available water temperature settings, and three water pressure settings.

Wide Spray Option – three width settings widens the wash spray from a strong concentrated

stream to a soft spray for a more personal and thorough wash.

Wireless Remote Control – the intuitive remote control comes with a convenient magnetic dock

and mounting bracket, and includes its own Eco Mode to conserve battery life.

Two User Memory Settings – personalize your settings like water temperature, water pressure,

and even the spray width to your own preferences and retain them with two programmable proﬁle

settings.

“Auto” Function – activates a preset for either a Front or Rear wash cycle. The Dry cycle will then

activate with the Swash 1400. See page 22 for more details.

Automatic Eco Mode – this function automatically lowers the seat temperature ten minutes after

the Swash was last used.

Quick-Release Seat – quick-release button for easy removal and cleaning of seat and toilet.

S1200/1400 PRODUCT FEATURES

PRODUCT FEATURES

(features vary depending on model)

Summary of content (13 pages)

PAGE 1
Swash Bidet Toilet Seat Installation PRODUCT INFORMATION PRODUCT INFORMATION PRODUCT FEATURES S1200/1400 PRODUCT FEATURES (features vary depending on model) Dual Stainless Steel Nozzles – separate stainless steel nozzles resist soiling and bacterial contamination for enhanced hygiene. The dual nozzle configuration ensures accurate coverage for all types of users. Aerated Wash Spray – micro-bubbles introduced into the wash spray create a gentler, softer wash action designed for sensitive skin.
PAGE 2
PRODUCT FEATURES (cont.) S1400-ONLY PRODUCT FEATURES Warm Air Dryer – includes adjustable temperature with three levels for a hands-free experience and toilet paper reduction – even elimination. Nozzle Oscillation – the move function provides a massaging, oscillating cleanse during the wash cycle ensuring a thorough and comfortable wash.
PAGE 3
PRODUCT INFORMATION (cont.) PRODUCT DIMENSIONS PRODUCT DIMENSIONS Elongated Top View 8 in 5.3 in 14.25 in 15.2 in 15.125 in Round Top View 8 in 5.3 in 14.25 in 15.2 in 14.25 in Bottom View Distance Between Mounting Holes 5.25 – 8.3 in 2.9 in Rear Fixing Distance: 6.9 in 8 Questions about installation? Call our customer service department at 888-542-3355 or visit brondell.com 5.25 – 8.
PAGE 4
PRODUCT PARTS PRODUCT PARTS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. Lid IR Sensor Stainless Steel Nozzles Body (seat) Sensor Seat Power Cord Bidet Hose T-Valve Drain Plug Water Inlet Quick Release Button Mounting Plate Deodorizer Night Light Remote Control 1 2 3 4 5 6 7 8 15 11 9 10 12 13 14 9 Questions about installation? Call our customer service department at 888-542-3355 or visit brondell.
PAGE 5
INSTALLATION PARTS PRODUCT INSTALLATION INSTALLATION PARTS 1. 2. 3. 4. 5. 6. 7. Mounting Bolt (2) Rubber Cone Washer (2) Flat Washer (2) Barrel Nut (2) Mounting Plate Adjustable Bracket (2) T-Valve Connector with Rubber Washer 1 8. 9. 10. 11. 12. 13. Bidet Hose Cable Clips (2) Remote Control Wall Mount Remote Screw (2) Remote Anchor (2) CR2032 Batteries (4) 5 2 3 6 4 7 8 11 9 12 10 10 Questions about installation? Call our customer service department at 888-542-3355 or visit brondell.
PAGE 6
BEFORE INSTALLATION BEFORE INSTALLATION WATCH OUR INSTALLATION VIDEO Installation for all Swash products can be found online at brondell.com CHECK FOR TOP MOUNT INSTALLATION If your fixture only has top-side access to the mounting bolts that hold the seat to the toilet, you will likely need to purchase the Swash Bidet Seat Top Mount Hardware Kit, found on brondell.com.
PAGE 7
PRODUCT INSTALLATION (cont.) PRODUCT INSTALLATION (cont.) SWASH INSTALLATION (cont.) 2. Turn Off Water Supply Valve and Flush Toilet a. Turn water valve off to stop the flow of water. b. Flush toilet and hold down handle to completely empty tank. c. Disconnect water supply hose from toilet tank. Do not disconnect from the water supply valve. NOTES: • You may wish to place a container under the tank to catch any excess water.
PAGE 8
PRODUCT INSTALLATION (cont.) SWASH INSTALLATION (cont.) 6. Connect the Bidet Hose to the Seat a. Connect the bidet hose to the water inlet. Hand-tighten to secure. Take care not to twist the bidet hose, excessively bend it, or strip the plastic screw threads when screwing the hose onto the bidet seat. 7. Attach the Swash to the Mounting Plate a. Set the Swash flat on the toilet bowl in front of the mounting plate, and slide seat onto plate until it is secure and “clicks” into place. b.
PAGE 9
PRODUCT INSTALLATION (cont.) PRODUCT INSTALLATION (cont.) REMOTE CONTROL INSTALLATION 1. Battery Installation a. Separate the remote control from the magnetic dock. b. Turn remote over and open the child-proof battery compartment by popping off the battery cover with a flat-head screwdriver or small coin. Insert the four included CR2032 batteries “plus” side up and replace battery cover. c.
PAGE 10
EXTERNAL BIDET FILTER INSTALLATION EXTERNAL BIDET FILTER INSTALLATION NOTE: • Customers with hard water, well water, and softened water can extend the life of their bidet seat by purchasing and installing an external inline water filter to be used with the Swash. The bidet filter should be changed every six months. 1. Turn Off Water Supply Valve and Flush Toilet. a. Turn water valve off to stop the flow of water. b. Flush toilet and hold down handle to completely empty tank. 2.
PAGE 11
PRODUCT STORAGE & USE | TROUBLESHOOTING PRODUCT STORAGE & USE Short Term Non-Use If the product will not be used for more than a few weeks, you can simply unplug it. You may also consider shutting the water supply off at the wall for extra precaution. Long Term Non-Use If the product will not be used for an extended time (longer than four months), you should unplug the unit, shut the water supply off at the wall, remove the Swash from the toilet, and then drain the Hot Water Heater.
PAGE 12
TROUBLESHOOTING (cont.) TROUBLESHOOTING (cont.) Problem The bidet seat is not working Product shuts off during use Low water flow or spray pressure Nozzles do not function properly Possible Cause(s) Solution(s) 1. Bidet not plugged in 1. Make sure the bidet is plugged in. 2. No power to Swash 2. Check and reset GFCI outlet. 3. There is power, but nothing happens when trying to use the Swash 3. The Remote Control batteries may be dead. Replace them if necessary. 4.
PAGE 13
TROUBLESHOOTING (cont.) Problem Possible Cause(s) Solution(s) Seat is not heated 1. Seat temperature set to off 1. Make sure that the Seat temperature setting is on (Low- Blue light, Med- Pink light, High- Red light, Off- No light). Bidet wash feature does not work or fails to spray 1. Body sensor does not detect that you are sitting on the Swash 1a. Adjust sitting position to fully cover the Body Sensor (see page 9). Water (wash spray) not heated 1. Water temperature set to off 1.