DELTA NE THE GARTH DR801 Control Panel £1 Nozzle Cleaning Button Eco Mode Button Seat Temperature Button #5 « if Water Temperature Button Water Pressure and Dryer Nozzle Position Button 3 .
DELTA NS The San DR801 Control Panel 1. Stop Button Stops all wash and dry functions currently operating. 2. Rear Wash / Move Button Press once to initiate a rear wash. Press again to initiate nozzle oscillation (repetitive forward and backward nozzle movement). 3. Front Wash / Move Button Press once to initiate a front wash. Press again to initiate nozzle oscillation (repetitive forward and backward nozzle movement). 4. Strong Wash / Move Button Press once to initiate a strong wash.
18 =. Using the DR801 NOTE: The wash functions will not work unless the sensor In the seat detects someone sitting down (with the builtin skin conductivity sensor). To override the Seat Sensor, please see the [Instructions on page 17, Prepare for Wash Sit on the seat to ensure skin-to-seat contact on the Seat Sensor. Once contact is made the water pressure indicator lights will turn on.
DENATURING THE Wage Special Mode Operations Eco Mode In this mode, the water in the tank and the seat temperature can be reduced to one of two different energy-saving settings. Standard Eco Mode: Press the Eco Mode button until the yellow indicator light is on for Low energy-saving, and the seat and water temperature will be heated to 89.6 °F. Once a person sits on the bidet, the Swash will revert to the last seat and water temperature settings used.
18 DEE RATING THE sas Special Mode Operations Activating / Deactivating Silent Mode 1. To activate Silent Mode, press and hold the “ — “ Water Pressure/Dry Temp button for four seconds. A beep will sound to indicate that Silent Mode has been activated. 2. To deactivate Silent Mode, press and hold the “ — “ Water Pressure/Dry Temp button for four seconds. Two beeps will sound to indicate that Silent Mode has been deactivated.
