Operating Guide

REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
SPECIFICATION SHEET
90F 99044530B
MODELS 764BN, 764RB, 764WH
VENTILATION FAN WITH
DECORATIVE LIGHT FIXTURE
TYPICAL SPECIFICATION
Ventilation Fan with Decorative Light Fixture shall be Broan
Model 764BN (764RB) (764WH).
Unit shall have galvanized steel housing with dual integral
mounting brackets. It shall be ducted to a roof or wall cap.
Blower assembly shall be removable and have a permanently
lubricated motor.
Light fixture assembly shall be plug-in, removable and include:
- a white alabaster glass shade and a corrosion-
resistant base with brushed nickel finish (764BN).
- an ivory alabaster glass shade and a corrosion-
resistant base with oil-rubbed bronze finish (764RB).
- a white alabaster glass shade and a corrosion-
resistant base with white finish (764WH).
Lamps shall be two 60 Watt maximum, B10 type, candelabra
bulbs.
Air delivery to be no less than 80 cfm and sound level no greater
than 2.5 sones. Air and sound ratings shall be certified by HVI.
Unit shall be U.L. Listed for use in insulated ceilings (Type I.C.)
HVI-2100 CERTIFIED RATINGS comply
with new testing technologies and
procedures prescribed by the Home
Ventilating Institute, for off-the-shelf
products, as they are available to
consumers. Product performance is
rated at 0.1 in. static pressure, based
on tests conducted in a state-of-the-art
test laboratory. Sones are a measure
of humanly-perceived loudness, based
on laboratory measurements.
DESCRIPTION
LIGHT FIXTURE:
• CorrosionresistantBrushedNickelfinishwithWhite
Alabaster glass shade (764BN)
• CorrosionresistantOil-RubbedBronzefinishwithIvory
Alabaster glass shade (764RB)
• CorrosionresistantWhitefinishwithWhiteAlabasterglass
shade (764WH)
• Closemountdesign
• Usestwo60Wattmaximum,B10type,candelabrabulbs.
Bulbs not included.
• Ventopeninginfixturebaseforexhaustfan
• Lightfixtureassemblyisplug-inandremovable
BLOWER:
• Plug-inpermanentlylubricatedmotor
• Polymericblowerwheel
HOUSING:
• Rugged,26-gagegalvanizedsteelconstruction
• 5-3/4"heightallowsfor2"x6"(nominal)joistinstallations
• Sturdykey-holedmountingbracketsforquick,accurate
installation
• Tapered,polymericductfittingwithbuilt-inbackdraftdamper
for easy, positive duct connection and no metallic clatter
NOTE:Forinstallationinflatceilingsonly.
U.L. Listed for use in insulated ceilings (Type I.C.)
Use supply wiring rated for at least 90° C
SPECIFICATIONS
MODEL VOLTS AMPS
 764BN/764RB/764WH 120 1.6
STATIC PRESSURE CFM SONES DUCT
0.10 80 2.5 4"Round