Use and Care Manual

14 1019100-C
English Manual
================================================================================================
OPERATION
TRANSIT POSITION OPERATING POSITION
1. Secure towing vehicle parking brake.
(See towing vehicle manual).
2. Place Aerator in the Transport Position.
3. Unload Aerator tray.
4. Remove cotter pin and drawbar pin.
5. Push aerator away from towing vehicle.
6. Install drawbar pin and cotter pin to towbar for storage.
CAUTION: AVOID INJURY! Keep body parts away
from under drawbar. Do not disconnect aerator from
the towing vehicle with weight on the tray.
CAUTION: AVOID INJURY! Keep body parts away
from under drawbar. Do not disconnect aerator from
the towing vehicle with weight on the tray.
REMOVING
- Pull FORWARD
on Handle Assembly (8).
- Pull out slightly and
position over Transport
Lock Pin (24). Aerator
rests on wheels.
- Pull OUT on the
Handle Assembly
(releasing from Transport
Position) and push
Handle BACK.
- Aerator should rest on Tines.
CAUTION: Avoid damage to tines. Engage the transport wheels when
crossing concrete or asphalt driveways and walkways.
8
22
22
8
CAUTION: AVOID INJURY!
Make sure feet and hands are clear of Tine Tips.
Avoid injury! Do not operate lift handle unless
attachment is installed to towing vehicle
INSTALLING
1. Park machine safely.
(See towing
vehicle manual).
2. Align the aerator clevis with
towing machine drawbar.
3. Install drawbar pin (17)
through clevis and machine
drawbar. Secure drawbar pin
with Hairpin Cotter (12).
12
17