Manualshelf

Use and Care Manual

ManualsBrandsBrinly-Hardy ManualsKitchen175 lb. 3.5 cu. ft. Tow-Behind Broadcast Spreader
12345678910
22 1020135-B
English Manual
USE AND CARE
MODELS:
BS26BH
BS26BH-A
BS261BH
SPECIFICATIONS
The fan speed and the spread width
are controlled by the speed of the vehicle.
The recommended operating speed is slightly faster than that of a brisk walk,
approximately 3 MPH (equal to the vehicle traveling 40 ft. in 9 seconds).
OPERATING SPEED
SPEED
LIMIT
3
DIMENSIONS
BS26BH & BS26BH-A
Size (maximum 56.7 kg
tow weight) ........... (125lbs)
Capacity ........... 0.07 cu m
(2.5 cu ft)
BS36BH & BS36BH-A
Size (maximum 79 kg
tow weight) ........... (175lbs)
Capacity ........... 0.10 cu m
(3.5 cu ft)
TIRES
Size .................. 13 x 5
Inflation Pressure ....... 20 psi
Tire pressure may be reduced to increase
wheel traction or to reduce shock, although
it should not be reduced to below 70%
of the maximum rated pressure.
BS36BH, BS36BH-A, & BS361BH
BS26BH, BS26BH-A, & BS261BH
The Gauge Plate Assembly operates the Flow Control Gate.
The Gauge Plate is marked from 0 (closed) to 10 (fully open). The position
selected determines the amount of material to be broadcast. The higher the
number, the heavier the application of material. Flow Control settings for many of
the common fertilizers, insecticides, and grass seeds are provided in Table 1.
If the material is not listed in Table 1, then use the calibration table found on
the decal provided on the hopper. After determining the correct setting number
for your material, move the Flow Control Handle to that position.
Lock the handle in place by moving the Handle Stop to that position and
tighten knob.
OPERATING FLOW CONTROL GATE
• Do not load the hopper with more than the maximum
weight capacity of 175 pounds.
• Break up any lumps as you fill the Hopper.
• Do not use on windy days, especially when spreading fine
grass seed or herbicides.
OPERATING TIPS
BS36BH
BS36BH-A
BS361BH

Summary of content (12 pages)