Use and Care Manual

7
- Wait until moving parts have stopped running before you remove the parts
of the appliance.
- Do not attempt to grind bones, nuts or other hard units.
- Never reach into the cutter housing. Always use the pusher.
- Unplug the appliance immediately after use.
- Never operate the appliance continuously for more than 10 minutes at
600W.
- Children should be supervised to ensure that they do not play with the
appliance.
- The use of this appliance by children or persons with a physical, sensory,
mental or motorial disability, or lack of experience and knowledge can give
cause to hazards. Persons responsible for their safety should give explicit
instructions or supervise the use of the appliance.
CLEANING AND MAINTENANCE
Remove Plug from socket. CLEAN THE APPLIANCE IMMEDIATELY AFTER EACH
USE. DISMANTLE REMOVABLE PARTS ONLY WHEN ALL MOVING PARTS HAVE
STOPPED RUNNING. WARNING: DO NOT SUBMERGE MOTOR UNIT IN WATER
OR IN ANY OTHER LIQUIDS. IF THIS HAPPENS DON’T USE THE APPLIANCE ANY
MORE; DISPOSE OF THE APPLIANCE.
Apart from the motor unit, all removable parts can be cleaned in hot, soapy
water. Do not use any abrasive or corrosive cleaning products or scourers. Do
not clean parts in dishwasher. Clean the motor unit with a damp cloth. Dry
them thoroughly before storage.
MAINTENANCE:
- Only process meat without bones and skin
- Wash the cutting disc every time after use and wipe dry, coat it with a few
drops of edible oil to prevent rusting
STORAGE
The separator, sausage horn, former and cone can be stored in the pusher.
See figure 5
Fig.5