Customer service email: support@breezary.
TABLE OF CONTENTS SAFETY PRECAUTIONS..............................1 BLADES INSTALLATION.................................8 PRE-INSTALLATION.....................................3 LIGHT FIXTURE INSTALLATION....................9 MATERIALS NEEDED...................................3 REMOTE USING............................................10 MATERIALS NEEDED...................................4 PARTS INVENTORY.......................................11 PREPARING FOR INSTALLATION...............
PRE-INSTALLATION MATERIALS NEEDED Wiring outlet and connectors of the type required by the local code.
Mounting bracket Remote control Receiver mount plate Motor bracket housing Wire Connectors blade x5 Blade bracket x5 Light kit x1 Bulb(not included) Wire Connectors( 6 Lock Washer (4) Flat Washer(4) Remote contrl Battery(not included) Machine Screw(2) Wood Screw(2)
10~11
The decorative motor housing has two mating slots (1) and two mating holes (2). Position both slots on the motor housing directly under and in line with two screws in the mounting bracket (3). Lift the motor housing, allowing the two screws to slide into the mating slots. Rotate the motor housing counterclockwise until both screws from the mounting bracket drop into the slot recesses. Tighten screws securely.
REMOTE USING Speed controller Light Timer 10
S Blade x5 Blade bracket x5 Light kit x1 11
TROUBLESHOOTING are not touching any other component. caused by uneven blade levels.
