ANTI - TIPPING KIT PARTS IDENTIFICATION A HARDWARE IDENTIFICATION 1PC DRESSER THIS TIP RESTRAINT MUST BE ATTACHED TO A WALL STUD USING LONG SCREW ENCLOSED. STEP 1 Attach a bracket securely to the back top rail of the dresser using short screw provided, through the smaller hole. 1 SHORT SCREW 1PC 2 LONG SCREW 1PC 3 CABLE TIE 1PC 4 L BRACKET 2PCS STEP 2 Locate the other bracket on the wall over a wall stud and two inches below the mounting bracket secured to the back of dresser.
