Instruction Manual

6 ENGLISH
TURN ON & SYNC
1. Slide the power switch up to the “on”
position. You will hear the BRAVEN
power up sound.
2. Activate Bluetooth
®
on the phone or
device you are pairing with (see your
device’s instruction manual for information
on activating its Bluetooth
®
settings).
3. Press and hold the Pairing Button on
the BRAVEN speaker until the Sync
Status Light begins to ash rapidly
and you hear the BRAVEN sync
sound.
4. Go to your phone or device’s
Bluetooth
®
settings and select the
BRAVEN device from the list.
5. If asked for a passcode enter “0000”
You only need to do this once for each device you are
syncing to your BRAVEN speaker. Your BRAVEN speaker
will remember the last 8 devices it has paired with.
NOTE: If the BRAVEN does not have an active
Bluetooth
®
connection and is left on, it will shut
itself o after 30 minutes. To restart the BRAVEN
you will need to slide the switch to the “o” position
and then back to the “on” position.