Specification

This specification and all information contained herein is the confidential and exclusive property of
BrassCraft Manufacturing, and shall not be disclosed to others without the written consent of BrassCraft
Mfg. This specification must be returned to BrassCraft Mfg. if requested.
400.163 G2A19 1/4 Turn Angle Stop with Push Connect and Verification Technology REV 02/16 2016 BrassCraft Mfg.
Product Submittal Form
G2A19 Sure2Connect
TM
1/4 Turn Angle Stop - Push Connect x
Compression with Verification Technology
Use: For use in potable water distribution systems. Not intended for recirculating systems that produce
continuous use temperatures above 115° F. For those applications, use our KT
TM
series ball stop
Design Features:
 Compatible with PEX, copper, and CPVC
 Multiple sealing technology. Rubber seals provide
chemical resistance
 Pre-installed tube stiffener “installation ready”
for a faster connection
 Verification clip “clicks” into place to provide an
audible confirmation of proper installation
 Rotational resistance provides ease of valve
operation
 One-piece shut-off mechanism provides smooth on-off
operation without freeze ups even after long periods of non-use
 Positive 1/4 turn shut-off
 Easy-to-remove handle protects against accidental operation
during rough-ins
 100% Leak tested
 No Lead
Operating Specifications:
Temperature: 40° - 140°F
Pressure: 125 PSI maximum
For Residential and Commercial Applications
MATERIAL SPECIFICATIONS
Body
Glass-filled nylon & brass
Stem Barrel
Santoprene
Stem Shaft
Glass-filled polypropylene
Stem O-ring
Rubber
Gripper Ring
Stainless steel
Push Connect Seals
Rubber
Tube Stiffener
POM
Verification Clip
Glass-filled nylon
Removal Flange
Glass-filled polypropylene
Handle
Chrome-plated ABS
Screw
Steel, zinc plated
Compression Nut
Brass, chrome plated
Compression Sleeve
Brass
JobName

Engineer/Architect

JobLocation

Wholesaler

SubmittalDate

Contractor
