Operation Manual

• Water pressure of 1-10 bars from your tap will enable your machine

to work more efficiently.(1 bar pressure means water flow of more

than 8 liters in 1 minute from a fully opened tap).

• After connections are completed, check for the non-leakage of the

connection joints by turning on your tap completely.

• Be sure that water inlet hoses are not folded, broken or crushed.

• Mount the water inlet hoses to a 3”/4, geared water tap.

Cold water inlet (White filter valve)

WATER DRAIN CONNECTION

• Be sure that water inlet hoses are not folded, twisted, crushed or

elongated by stretching.

• Water drain hose should be mounted at a height of minimum 60 cm,

maximum 100 cm from the ground.

• The end of the water drain hose may directly be fitted to the dirty

water outlet hole or a special apparatus mounted on the outlet

bracket of the wash-stand.

• Never attempt to extend the water drain hose by adding extra parts.