GUIDE FOR INSTALLATION & USE Washing machine
Dear Costumer, You have just acquired a BRANDT washing machine and we would like to thank you. We have invested all our dedication and know-how in this appliance so that it would best meet your needs. With innovation and performance, we designed it to be always easy to use. In the BRANDT product range, you will also find a wide choise of ovens, microwaves, cooking hobs, ventilation hoods, cookers, dishwashers, driers, fridges and freezers, that you can coordinate with your new BRANDT washing machine.
washing machine contents WARNINGS 6 SPECIFICATIONS 7 INSTALLATION AND ASSEMBLY 8 USING THE APPLIANCE AND PRACTICAL TIPS 12 MAINTENANCE AND CLEANING 21 SAFETY AND TROUBLESHOOTING 23 ENVIRONMENTAL NOTICE 26
warnings To prevent risk of fire, electric shock, personal injury or other damage when using the washing machine, please take the following precautions: This washing machine comes with a manual containing operating, maintenance and installation instructions. Please read these instructions carefully before using the appliance.
washing machine specifications Electric cable Top Control panel Detergent dispenser Drain hose Drum Loading door Accessible filter (behind the plinth) Plinth Levelling feet ACCESSORIES Water supply hose 7
washing machine installation and assembly AND 1 UNPACKING UNBLOCKING THE WASHING MACHINE UNPACKING a Remove the base, the corner pieces and the top protection cover. UNBLOCKING a Unscrew the screws holding the 3 plastic cover pieces in place, at the rear of the washing machine. b Unscrew and remove the 3 metal fixing flanges. Important c Use the previously removed cover pieces to cover the holes.
THE WATER AND 2 CONNECTING DRAIN TUBES installation and assembly CONNECTING THE WATER HOSE The water supply hose is inside the drum. a Connect the bent end of the tube to the grooved input of the water valve on the rear of the appliance. Important b Connect the other end of the tube to the water supply. Make sure you firmly tighten the locking nut. Make sure you connect the elbow of the water supply hose correctly, to avoid any risk of flooding.
THE WASHING MACHINE AND 3 LEVELLING ELECTRICAL CONNECTION installation and assembly Important LEVELLING Level the appliance using its adjustable legs, to reduce noise and to stop the washing machine from moving during washing. Do not pull the legs out too far, as this will affect the stability of the appliance. For models with nuts, tighten the nuts with a spanner. ELECTRICAL CONNECTION Important Consult the instruction plate on the washing machine loading door before making the electrical connection.
4 PRE-CLEANING PRE-CLEANING a b When your washing machine has been correctly installed, we recommend that you pre-clean the machine. This is to check that the installation, the connections and the drainage are all correct, and to thoroughly clean the inside of the washing machine before any wash programmes are run (see the operating instructions on the following pages). Start/Pau a Select the Cotton 60ºC programme. b Press the Start/Pause button.
washing machine using the appliance and practical tips 1 PREPARING GARNMENTS FOR WASHING Important PREPARATION Make sure you empty the pockets of the clothes before you place them in the drum. Small objects could block the drain pump. Important SORTING THE CLOTHES Check your woollens are machinewashable before washing them. If you wish to use the drying programme, first check that the fabric is suitable for machinedrying. Consult the label.
2 USING DETERGENTS AND ADDITIVES using the appliance and practical tips DETERGENTS AND ADDITIVES a a The detergent drawer of your washing machine is divided into 3 compartments. PREWASH WASH FABRIC SOFTENER b Before washing, place the detergent and additives in their corresponding compartments. c You can also use liquid detergents in the washing machine. To do this, use the optional compartment, which you can acquire by contacting the Technical Assistance Service.
3 SELECTING THE WASHING AND DRYING PROGRAMMES using the appliance and practical tips drying time button detergent compartment programme selector dial spin dry selector button intensive wash button easy ironing button start/ stop button extra rinse button complementary functions a To select a wash programme, proceed as follows: a Starting from the “Stop” position, the washing machine will switch on when you select the desired wash programme (see programme chart).
using the appliance and practical tips To select the drying time, proceed as follows: a a Select the drying time in minutes by pressing the drying time button. r ying Time Important The duration will appear on the display. Press this button several times to progressively increase the drying time. If you select a wash+dry function, make sure you do not exceed a load of 4 Kg (or 1.5 Kg for delicate wash programmes).
Additional P. Wool P. Delicate P. Drying P. Synthetic P. Drying P.
stop Max. Load (kg) Total consumption (kwh/litre) Approx.
4 SELECTING THE COMPLEMENTARY FUNCTIONS using the appliance and practical tips SPIN SPEED SELECTION a The programme selected is associated with a certain spin speed. a To change it, turn the spin speed selector. b No spin Turn the spin speed selector to the “0” position to obtain a programme with no final spin, used to prevent particularly delicate fabrics from creasing. FULL TUB STOP The wash programme stops on the last rinse, with the clothes left in water.
using the appliance and practical tips EASY IRONING This option prevents garments from creasing by means of carrying out a special programme with special turns to fluff out the garments after spin-drying and make them easier to iron. EXTRA RINSE Increases the level of the final rinse obtained in the clothes; suitable for large loads and garments belonging to people with sensitive skin. Increases water consumption! START/PAUSE To start up your washing cycle, press the Start/Pause button.
AND DRY PROGRAMME RUNNING AND 5 WASH ELECTRICITY CUTS using the appliance and practical tips PROGRAMME RUNNING Important When the programme starts up, the remaining time until it finishes will appear on the screen. Complementary functions can be selected at any time, providing the corresponding washing cycle has not finished and the programme admits this function. If you press the Start/Pause button during the washing process, the washing machine will stop and go onto PAUSE.
washing machine maintenance and cleaning MAINTENANCE After each wash programme, leave the loading door open for a short time so that air can circulate around the washing machine. Important From time to time, depending on the water hardness in your area, it is recommendable to run a full wash cycle using an anti-scale product. This will prolong the life of your washing machine. Unplug the washing machine from the mains before carrying out any cleaning or maintenance operations.
THE ACCESSIBLE FILTER AND THE OUTSIDE 2 CLEANING OF THE WASHING MACHINE maintenance and cleaning CLEANING THE FILTER a The accessible filter should be cleaned if the drain pump has become blocked by any foreign objects. a Remove the plinth by pulling gently on its sides and turning it downwards. It can then be unclipped. If you cannot access the sides, insert a small screwdriver into the three grooves at the top of the plinth and exert leverage. It can then be unclipped.
washing machine safety and troubleshooting If you observe any problems with your washing machine, consult the indications below. Important If they do not help you to solve the problem, unplug the appliance and contact the TECHNICAL ASSISTANCE SERVICE. Indicator Problem FO1 Water is not entering FO2 The washing machine is not draining or spinning CO3 It is not spinning FO4 It will not start up FO5 . . . . . F10 Never open up the appliance yourself.
safety and troubleshooting The washing machine is not filling If F01 appears on the display: Check the water supply is not cut off, the water tap is open and the washing machine water entry filter is not blocked. Solution: Wait until the water supply comes back on, turn on the water supply tap, remove the water inlet hose and clean the filter. If this failure occurs, F01 will appear on the display.
safety and troubleshooting Why is there water left in the detergent drawer? Check the detergent drawer is clean. To clean it, follow the instructions in Maintenance and Cleaning of the appliance. 1- Cleaning the detergent drawer. Why can’t I open the door as soon as the wash programme ends? Today’s washing machines are equipped with user safety systems. The washing machine door cannot be opened if the drum has not totally come to a halt.
washing machine protecting the environment The packaging materials for this appliance can be recycled. If you recycle them, you will contribute to protecting the environment. Please place them in the municipal recycling bins provided for this purpose. Your appliance also contains a large number of recyclable materials. It is marked with this symbol to show that in European Union countries used appliances must not be disposed of with other waste.
01/08 REFERENCIA
WFD711A
2 3 4 7 17 19 22 1
/ 2
( 3 )
1 a a b 3 3 c 4
2 : a b 0.05 - a 1MPa 0.
3 a b c 6
4 ( ) a b 60 / 7
1 ( ) a b c 8
2 / a / b 9
3 / / / a b 10
a 4 1.
(**) / / + 1 60 / 2 90 3 60 4 40 5(*) 30 / / / 6 / 7 / / 60 / 8 / 40 9 / / / 10 / 40 / 11 / 40 / 40 12 30 / / 13 14 / / / 30 / 15 / 12 /
/ ( / )/( ) ( 6 1,45/60 105 6 1,90/55 120 6 1,02/49 91 6 0,40/49 87 6 1,45/60 82 4 2,8/48 160 3 1,8/27 100 3 1,00/55 70 3 0,60/55 55 1,5 1,2/26 95 3 0,60/55 65 3 0,35/55 60 1 0,50/60 40 1 1,00/55 30 1,5 0,20/30 30 6 0,05/0 10 13 )
4 a b 0 14
/ / 15
5 / / / ( ) 16
1 a b c 17
2 a 3 b c 90 180 d e f 30 18
? " F04 ? 19 / "
? F01 F01 ? F02 2 F02 ? C03 ? 20
? 1. ? 2 F05,F06...
22
232 2/F.