6100 User Guide

Setting Individual Days (7 Day Commercial)

1. Touch the PROG TouchPad. The display will switch to

programming mode. M (Monday) will appear and the hour

will ﬂash.

2. Touch SYSTEM to select HEAT or COOL.

3. Touch DAY/TIME to select an individual day.

4. Press the SpeedBar

up or down to adjust the hour for the

OCCUPIED event. Touch NEXT.

5. Press the SpeedBar up or down to adjust the minute for

the OCCUPIED event. Touch NEXT.

6. Press the SpeedBar up or down to adjust the temperature

for the OCCUPIED event. Touch NEXT.

7. Press the SpeedBar up or down to adjust the fan setting

for the OCCUPIED event. Touch NEXT.

8. Repeat steps 4-7 for your UNOCCUPIED event.

9. If needed, repeat steps 3-7 to select other individual days.

10. If needed, repeat steps 2-9 to program the opposite

mode (HEAT or COOL).

11. Touch RETURN to exit.

User Manual 20