User Manual

WavePoint™ Portable RFID Reader/Writer User’s Guide

Read Tag Data

This screen allows you to read a tag’s data:

• To perform an operation click

Read Tag.

• To place the reader in a mode of continuously performing this

operation, check Continuous and click

Read Tag.

Status of each operation will be displayed on the status bar located at the

bottom of the window.

NOTE: If you enabled the Button press required option,

remember to press the button on your WavePoint Wand

reader in order to carry out the operation.

If you have moved the tag’s private boundary using the ‘R/W Password and

Boundary ’ screen, you must specify the valid password in order to access all

of the tag’s data. This only applies to the 1K Read/Write tag.