Cut Sheet

ManualsBrandsBrady ManualsLockoutsAbus Safety Pl 1.5 In Shackle Purple 6/pac

Chemical °C Chemical °C

Acetone

15–

Nickelsaltsolns.(chloride,

sulfate)

15–30

Ammoniasoln.

15–

Petroleum 15–30

Ammoniasoln. 48 Siliconeoils <80

Fuel,engine:Gasoline(Leaded&

Unleaded)

48 Toluene 15–30

Fuel,Diesel 85 Water(includingseawater) 15–30

Heptane

15–

Water(includingseawater),

chlorinated(<0,5mg/l)

Lubricationoil:gearoil <130 Zincchloride 15–30

Lubricatingoil:HDengineoils,

hydraulicoils,transformeroils

<130  

TechnicalDataSheet

SafetyPadlockSteelShackle

TDSNo.LOTO8

EffectiveDate:11/20/2012

Description:

Design



Compact,lightweight,andsuperior

corrosionandchemicalresistance

Nonconductive,sparkresistantlock

body

Insulatedkeychamberprotectsworkers

fromshockwhenthekeyisinserted

Keywon’treleaseuntilthepadlock

shackleissecurelyclosed

6pincylinderforbettertamper

resistance

Material

LockbodymadefromPolyamideNylon

Color:LockBody

Black

Orange

Blue

Green

Red

Violet

Yellow

Brown

Shacklemadefromsteel

ULRatingUL94–HB(Plastic

ComponentsOnly)

TemperatureRange

ServiceTemperature:20°to120°C

(0°to250°F)

ChemicalResistance

Allapprovedchemicalslistedarebasedonthe

manufacturesspecifiedchemicalresistance

chartforplasticmaterialonly.

Dimensions



“A” – 1.50[38.1mm]

“B” – 1.75[44.5mm]

“C” – 0.82[20.8mm]

“D” – 1.50[38.1mm]

“E” – ø0.25[6.4]



Warranty 

Note:Allvaluesshownareaveragesandshouldnotbeusedforspecificationpurposes.Testdataandtestresultscontainedinthisdocument

areforgeneralinformationonlyandshallnotberelieduponbyBradycustomersfordesignsandspecifications,orbereliedonasmeeting

specifiedperformancecriteria.Customersdesiringtodevelopspecificationsorperformancecriteriaforspecificproductapplicationsshould

contactBradyforfurtherinformation.

ProductcomplianceinformationisbaseduponinformationprovidedbysuppliersoftherawmaterialsusedbyBradytomanufacturethisproduct

Summary of content (3 pages)

PAGE 1
Technical Data Sheet Safety Padlock Steel Shackle TDS No.
PAGE 2
or based on results of testing using recognized analytical methods performed by a third party, independent laboratory. As such, Brady makes no independent representations or warranties expressed or implied, and assumes no liability in connection with the use of this information.
PAGE 3
Trademarks: Note: All values shown are averages and should not be used for specification purposes. Test data and test results contained in this document are for general information only and shall not be relied upon by Brady customers for designs and specifications, or be relied on as meeting specified performance criteria. Customers desiring to develop specifications or performance criteria for specific product applications should contact Brady for further information.