Datasheet

ManualsBrandsBrady ManualsAdhesive TapesFloor Marking Tape, 76.2mm x 30.48m, Black

Technical Data Sheet

Brady B-514 Floor Marking Graphics

TDS No. B-514

Effective Date: 2011-06-29

Description:

Brady B-514 is a surface printed polyester with a rigid, clear polyester overlaminate

Details:

Use:

Brady B-514 is used to mark aisles, passageways, storage locations, and point out safety equipment and exits

Special Properties:

Brady B-514 exhibits a dry slip index of 1.0 when tested using an English XL Variable Incidence Tribometer per ASTM / ANSI

F1679. B-514 exceeds safety standards for clean, dry non-slip surfaces per ANSI A1264.2-2006 and OSHA 1910.22.

Adhesive Type:

Permanent rubber based adhesive

Substrate Type:

Polyester

Standard Material Colors:

Summary of content (4 pages)

PAGE 1
Technical Data Sheet Brady B-514 Floor Marking Graphics TDS No. B-514 Effective Date: 2011-06-29 Description: Brady B-514 is a surface printed polyester with a rigid, clear polyester overlaminate Details: Use: Brady B-514 is used to mark aisles, passageways, storage locations, and point out safety equipment and exits Special Properties: Brady B-514 exhibits a dry slip index of 1.0 when tested using an English XL Variable Incidence Tribometer per ASTM / ANSI F1679.
PAGE 2
Yellow, Red, Green, White, Blue, Black, Orange Thickness (PSTC-33): 0.008 in. (0.20 mm) Adhesive Properties: Adhesion to Stainless Steel (PSTC-101) 15 Minute Dwell (Avg.) – 155 oz/in (169 N/100 mm) Ultimate Dwell (72 hrs.) (Avg.) – 158 oz/in (172 N/100 mm) Tack (ASTM D2979) (Avg.) = greater than 1000 g Abrasion Resistance (Method 5306 of U.S. Federal Test Method Std. No. 191A): H-22 Stone Wheels, 1000g wts. Material withstands over 9000 cycles S-35 Tungsten Carbide Wheels, 1000g wts.
PAGE 3
0% Sulfuric Acid 1A 1A 1A 1A 1A 1A 10% Sulfuric Acid 1A 1A 1A 1A 1A 1A 30% Hydrochloric Acid 1A 1A 1A 1A 1A 2A 10% Hydrochloric Acid 1A 1A 1A 1A 1A 1A Glacial Acetic Acid 1A 1A 1A 1A 1A 5E 10% Acetic Acid 1A 1A 1A 1A 1A 1A 50% Sodium Hydroxide 1A 1A 1A 1A 1A 5E 10% Ammonia 1A 1A 1A 2A 2A 5E 5% Sodium Hypochlorite 1A 1A 1A 1A 1A 1A 10% Sodium Chloride 1A 1A 1A 1A 1A 1A MEK 1B 1B 1B 1B 1B 5E Acetone 1A 1A 1A 1A 1A 5E Toluene
PAGE 4
5. Print completely removed by immersions E. Tape destroyed Product testing, customer feedback, and history of similar products, support a customer performance expectation of at least two years from the date of receipt for this product as long as this product is stored in its original packaging in an environment below 80°F (27°C) and 60% RH . We are confident that our product will perform well beyond this time frame.