Specification Sheet

Floor-Mounted Overhead-Braced Restroom Partitions
Stainless Steel — Series 400 – Sentinel
TM
Verify all rough-in dimensions prior to installation.
Consult local and national codes. Conformity and compliance to local and national codes
is the responsibility of the installer.
© 2018 Bradley
P.O. Box 309, Menomonee Falls, WI 53052-0309
800 BRADLEY (800 272 3539) [phone]
bradleycorp.com
Page 1 of 1 9/13/2018
This information is subject to change without notice.
Bradley_Partitions_StainlessSteel_OverheadBraced
This is the most popular style of partitions. It is attached to the floor and stabilized at the
top of the pilaster with anti-grip headrail. Floor-mounted overhead-braced material is
recommended for heavy traffic or vandalism-prone areas. It does not require any special
floor or ceiling construction which makes it suitable for new or existing construction.
Construction
Doors, panels and pilasters consist of two sheet metal faces insulated with a moisture-
resistant honeycomb core that is adhered to the inner surface and set under pressure
to cure. All are manufactured from 300 Series stainless steel with a #4 satin brushed
finish.
Permaseal
TM
Edge
Mills is the only manufacturer to offer the Permaseal Edge. Edges are formed to
interlock together to provide a tight fit without crown molding.
Panels
Panels are 1" thick, constructed from 22 gauge stainless steel. Corners are welded
underneath a clip that is affixed to all corners.
Doors
Doors are 1" thick, constructed from 22 gauge stainless steel. Corners are welded
underneath a clip that is affixed to all corners. Each door includes internal 16 and
14 gauge welded reinforcements at the top and bottom hinge locations with a
factory installed concealed true gravity cam. The closing position of each hinge is
fully adjustable. A pre-punched hole permits field installation of the ADA-compliant
concealed slide latch.
Pilasters
Pilasters are 1¼" thick, constructed from 20 gauge stainless steel. The floor end of the
pilaster shall be provided with an internally welded 18 gauge bracket(s) that will accept
a 5/16" stainless steel hex bolt. The bracket(s) shall connect to stainless steel "L"
bracket(s) that are secured to the floor with stainless steel fasteners. The hex bolt(s),
which are provided in the shoe kit, can be added to the floor end of the pilaster for
leveling.
Hardware
Mills standard hardware is constructed from heavy-duty grade chromed Zamac.
Compartments are provided with all hardware and zinc-plated fasteners to complete
installation for applications with concrete floors and masonry block walls.
Door Hardware
Wraparound hinges are thru-bolted to the pilasters and the concealed slide latch
includes an emergency egress feature. The slide latch does not require a twisting
motion and complies with all Federal ADA guidelines. The strike/keeper is wraparound
and thru-bolted. Doors 32" wide or less are provided with a combination coat hook/
bumper. Doors 34" wide or 36" wide are provided with an individual coat hook, door
bumper and door pulls. Torx-head fasteners are supplied with all hardware.
Brackets
Stirrup-type single-ear, double-ear and U-brackets are provided with torx-head
fasteners.
Headrail
Etched and anodized aluminum headrail is extruded with an anti-grip profile. It clamps
over the pilaster and is secured at the wall with plastic brackets.
Shoes
Shoes are 1-piece, 4" high, 304 Series stainless steel with #4 satin brushed finish and
are secured to the inside face of the pilaster with stainless steel Torx-head fasteners.
Series 400 – Sentinel
TM
Optional Selections
Finish
¨Satin Brushed (STD)
Texture
¨Leather Grain
Hinges
¨Chromed Zamac Wraparound Gravity Hinge (STD)
¨Stainless Steel Wraparound Gravity Hinge
¨Continuous Aluminum Spring-Loaded Hinge
¨Continuous Stainless Steel Spring-Loaded Hinge
Door Hardware
¨Chromed Zamac Concealed Slide Latch and Keeper (STD)
¨Stainless Steel Concealed Slide Latch and Keeper
¨Zamac Surface-Mounted Slide Latch and Keeper
¨Stainless Steel Surface-Mounted Slide Latch and Keeper
Brackets
¨Chromed Zamac Stirrup Brackets (STD)
¨Stainless Steel Stirrup Brackets
¨Continuous Stainless Steel Brackets
¨Continuous Aluminum Brackets
Miscellaneous
¨Grab Bar Reinforcements
¨Cutouts
¨Solid Particle Board Core (must select doors, panels and/or pilasters)
 ¨Doors
 ¨Panels
 ¨Pilasters
¨No Site
Corners
¨Clipped Corners (STD)
¨Welded Corners/Ground Smooth
Extra Height
¨72" H Doors and Panels