Specification Sheet

S19224 Series
European and Australian Wall-Mount Halo™ Eyewash or Eye/Face Wash
© 2018 Bradley
P.O. Box 309, Menomonee Falls, WI 53052-0309
800 BRADLEY (800 272 3539) [phone]
bradleycorp.com
Page 1 of 4 10/22/2018
This information is subject to change without notice.
Bradley_EyeFaceWash_S19224Series_EU_AUS
Bowl
Bowl is constructed of yellow impact-resistant plastic or Type 304 corrosion-resistant
stainless steel. Optional dust cover is constructed of transparent yellow impact-resistant
plastic or Type 304 corrosion-resistant stainless steel.
Activation
Type 304 stainless steel push handle with optional type 304 stainless steel foot pedal.
Wall Bracket
Heavy-gauge sand cast aluminum protected with BradTect safety yellow coating. Includes
three clearance holes for mounting bracket onto wall (mounting hardware not included).
Waste
1¼" drain fitting and tailpiece furnished.
• Halo™ Delivers the Most Effective Eye/Face Washdown Coverage and Spray Pattern
• Exceeds Australia/New Zealand AS-4775 & AS/NZS 4020
• Industry's Only Self-Draining Design – The Aquaduct™
• Separate Supply and Waste Pipes – Meets CEN and Plumbing Requirements
• Ergonomic Hand Activation Eyewash Paddle – Easy to Reach from Any Direction
• Barrier Free
• Fully-Assembled and Factory-Tested Eyewash or Eye/Face Wash with Hinged Dust Covers
• Yellow Transparent Plastic and Stainless Steel Bowl Covers Available
• Universal Identification Sign and Inspection Tag Included
• Certified by IAPMO OCEANA to AS4775 and AS/NZS 4020
• Halo™ is Covered by One or More of the Following Patents: 9,700,484; 9,314,398;
D662220; D673298; D662605; D685920; D662219; and D671228. Other Patents
Pending.
Specifications
Standard Eyewash or Eye/Face Wash Units save space and fit easily into any work
environment. Halo eyewash or eye/face wash, operated by an ergonomic, highly visible
push handle, provides effective wash down coverage and spray pattern. Integral strainer
reduces debris in the water and also prevents clogging.
This plumbing fixture is not intended to dispense water for human
consumption through drinking or for preparation of food or beverages.
Pipe and Fittings
Piping to ½" BSPP water supply inlet on unit. Piping to 1¼" BSPP drain outlet for
eyewash.
1¼" piping assembly manufactured of one of the following materials:
• Type 304 corrosion resistant stainless steel
Ball Valve
½" stay-open eye and eye/face wash valve manufactured of the following materials:
• Type 316 stainless steel
Eyewash
The Halo eyewash system offers a high performance rinsing platform that provides rapid
relief to an individual’s eyes that have been injured by chemicals or particulate. The
eyewash includes an integral 5.1 GPM (19.2 L) flow control, providing water at a safe
velocity while maintaining its effectiveness (exceeds minimum water flow of 0.4 GPM
(1.5 L) at 30 PSI (2.0 bar)). Eyewash is protected by flip open dust covers that open when
product is activated or by a full bowl dust cover that activates the unit when it is opened.
Safe, steady water flow under varying water supply conditions from 30–90 PSI (2.0-6.1 bar)
is assured by integral flow control in the sprayhead assembly.
Eye/Face Wash
The Halo eye/face wash system offers a high performance rinsing platform that provides rapid
relief to an individual’s eyes and face that have been injured by chemicals or particulate. This
system provides the most complete face wash available in the market. The eye/face wash
includes an integral 5.1 GPM (19.2 L) flow control, providing water at a safe velocity while
maintaining its effectiveness (exceeds minimum water flow of 3.0 GPM (11.4 L) at 30 PSI (2.0
bar)). Eye/face wash is protected by flip open dust covers that open when product is activated or
by a full bowl dust cover that activates the unit when it is opened. Safe, steady water flow under
varying water supply conditions from 30–90 PSI (2.0-6.1 bar) is assured by integral flow control
in the sprayhead assembly. Sprayheads are made from an impact resistant ABS plastic or from
durable 304 stainless steel with electro-polished finish.
Model S19224
shown with
eyewash
Drench hose, backflow prevention and mixing valves are not certified
to Australia AS4775 or European EN 15154-2.
Tepid Water Options
Navigator S19-2000 EFX8
Emergency Thermostatic Mixing Valve
Keltech CLE-Series
Tankless Water Heater
Satisfies ANSI/ISEA Z358.1 tepid water requirements.