Installation / Operation Instruction Manual

44
Maintenance continued-
original equipment.
incident.
Do not operate water heater with jumpered, altered,
loosely tightened or absent controls and/or components.
Do not operate water heater with replacement controls
and/or components which are not exact duplicates of
Thoroughly inspect and replace, (as needed) burner inner
door gasket and/or sight window gasket any time burner
inner door is removed or disturbed.
Replace water heater if involved in flammable vapor
This water heater is equipped with a flammable vapor
water heater control will shut down the water heater and
display a code of 7 flashes and then a 3 second pause.
If a 7 flash error code is present, check to see if flammable
vapor is present in the area. If flammable vapor is
present or suspected in the area, immediately leave the
area and contact a service professional.
If you are certain there is no flammable vapor present,
check the flammable vapor sensor to make certain
it has not become disconnected from the control.
Review this instruction manual for troubleshooting.
sensor. If the sensor is exposed to flammable vapor, the
Do not try to light any appliance.
Do not touch any electric switch; do not use any
phone in your building.