Product Overview

ManualsBrandsBradford White ManualsPlumbing Supplies19 Gallon - Utility Energy Saver Electric Residential Water Heater, 240V

MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 5,682,666; 7,634,976; 5,660,165; 5,954,492; 6,056,542; 6,935,280; 5,372,185; 5,485,879; 5,574,822; 7,971,560; 7,992,526; 6,684,821;

7,334,419; 7,866,168; 7,270,087; 7,007,748; 5,596,952; 6,142,216; 7,699,026; 5,341,770; 7,337,517; 7,665,211; 7,665,210; 7,063,132; 7,063,133; 7,559,293; 7,900,589; 5,943,984; 8,082,888; 5,988,117; 7,621,238;

7,650,859; 5,761,379; 7,409,925; 5,277,171; 8,146,772; 7,458,341; 2,262,174. OTHER U.S. AND FOREIGN PATENT APPLICATIONS PENDING. CURRENT CANADIAN PATENTS: 2,314,845; 2,504,824; 2,108,186;

2,143,031; 2,409,271; 2,548,958; 2,112,515; 2,476,685; 2,239,007; 2,092,105; 2,107,012. Vitraglas

is a registered trademark of Bradford White

Corporation.

Residential Utility

Electric Water Heater

The Utility Electric Models Feature:

■ Fully Automatic Controls—Fast acting surface-mount thermostat with high

limit energy cut-off (manual reset) for safety.

■ Direct Heat Transfer With a Single Immersed Element—Transfers heat

directly and efficiently to the water. Screw-in style element.

■ Vitraglas

Lining—An exclusively engineered enamel formula that provides

superior tank protection from the highly corrosive effects of hot water. This

formula (Vitraglas

) is fused to the steel surface by firing at a temperature of

over 1600°F (871°C).

■ Insulation System—1" (25mm) Non-CFC foam insulation covers the

sides and top of the tank, reducing heat loss. This results in less energy

consumption, improved efficiencies, and jacket rigidity.

■ Water Connections—3⁄4" (19mm) NPT factory-installed true dielectric fittings

extend water heater life and simplify water line connections. Located on the

side for easier installation (Fittings packaged separately inside carton).

■ Protective Magnesium Anode Rod—Provides added protection against

corrosion for long-term, trouble-free service.

■ Voltages Available—120V, 208V, 240V, 277V, 480V.

■ Single Phase Operation Only.

■ T&P Relief Valve—Installed.

■ Design evaluated by ETL in accordance with Part 280.707(d) of HUD

Mobile Home Construction and Safety Standards for Energy Efficiency.

Photo is of

RE112U6

1222-A-0418

Copper Screw Type Immersion Element

(INCOLOY

type immersion element available upon request)

6 or 10-Year Limited Tank Warranties / 6 or 10-Year Limited Warranty on Component Parts.

For more information on warranty, please visit www.bradfordwhite.com

For products installed in USA, Canada, and Puerto Rico. Some states do not allow limitations on warranties. See complete

copy of the warranty included with the heater.

Summary of content (2 pages)

PAGE 1
Residential Utility Electric Water Heater The Utility Electric Models Feature: ■ Fully Automatic Controls—Fast acting surface-mount thermostat with high limit energy cut-off (manual reset) for safety. ■ Direct Heat Transfer With a Single Immersed Element—Transfers heat directly and efficiently to the water. Screw-in style element. ■ Vitraglas® Lining—An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water.
PAGE 2
Residential Utility Electric Water Heater Utility Models Nominal Gal. Capacity Model Number RE16U6† RE110U6 RE112U6 RE112T6† RE115U6 RE120U6 Recovery at 90°F Rise* E Floor to T&P Conn. in. F Floor to Anode Rod in. G Water Conn. NPT U.S. Gal. Imp. Gal. U.S. GPH Imp. GPH in. C Floor to Cold Water Conn. in. in. H Floor to Electrical Access in.