Installation Guide

Instruction

Kitchen Faucet

DIY

Pull-down kitchen faucet:

installation is the below 4 steps in total.

3.Connect the water hoses to

the angle valve by wrench.

Drinking water faucet:

Another 4 different assembling

connections for your needs.

TIPS:

a.Flush the block and the water supply pipes thor-

oughly before installation.

b. Clean the surface of the faucet regularly

c.Avoid sharp objects and acidic detergent to the sur-

face of the faucet.

d.The hoses for the drinking water function are not in-

cluded in our packaging.

If you have any queries about our products, please feel

free to contact us.

For the cold and hot supply hoses:

a.If the water output becomes less, there may be impu-

rities stuck onto the filter.

b.Please take the filter out and have it washed thor-

oughly,as what is shown below.

4. Clasp the weight to the

label“Weight Here”.

PAGE 1
DIY Pull-down kitchen faucet: installation is the below 4 steps in total. a.Flush the block and the water supply pipes thoroughly before installation. Instruction Kitchen TIPS: b. Clean the surface of the faucet regularly c.Avoid sharp objects and acidic detergent to the sur- Faucet face of the faucet. d.The hoses for the drinking water function are not included in our packaging. If you have any queries about our products, please feel free to contact us. 3.
PAGE 2
DIY Robinet de cuisineà tirette: l'installation estles 4étapes ci-dessous au total. de ASTUCES: un. Rincer soigneusement le bloc et les tuyaux d'alimentation en eau avant l'installation. Enseignement Robinet DES b. Nettoyez regulierement la surface du robinet. c.Evitez les objets pointus et les detergents acides à la surface du robinet. cuisine 1.Placez tous les tuyaux dans le trou de l'evier. 2.Vissez l'ecrou dans le sens inverse des aiguilles d'une d.