ITEMS IN THE PACKAGE Black Gasket teal Washers Fading Bolts Gravity Ball Kitchener Faucet Battery Case Adapter [OPTIONAL . Control Va lie You may peed: Solenoid Troubleshooting Note: Normal operation of the faucet taciturn off water flow if faucet is mot touch less for 3 minuses. 1. f your spout flashes a rod fight on then off and then keeps repeating:this, replace the batteries.
INSTALL F Ln A imseitfauct piing [a into the faucet B Before retaliation, please screw the 5 : shouting bracket ih) ACCESSORY nut F1 mount FAUCET TO DECK A A Insert faucet ivies and shank through B Before installation, please unscrew the manning bole in sink; and place faucet Accessory tut fa) over mounting hole, Ensure that the fight at the base is facing forward, Secure the gravity bail) to the hose(a), then tighten locking screws using a Philips screwdriver NOTE: Deportment mounting height is & 25 inches
TOUCH LESS PULL-DOWN KITCHEN & BAR/ PREP FAUCET READ ALL INSTRUCTIONS PRIOR 10 INSTALLATION WARRANTY *Parts:and Finish Lifetime mused warranty: or for commercial purchases, 18 years for milt fail. residential apartments and 5 years for off other commercial uses, fn each sate from the date of purchase, Electronic Parts and Batteries ff applicable) 5 years from the date nf purchase; or for commercial purchasers, year from the date of purchase.
[EJ MOUNT FAUCET TO DECK A Secure faucet to sink with mounting bracket (5) and Black Gasket (3) and Meta Gasket(4) ensure parts are oriented as shown in Insert B. Mount underneath sink, hand tighten, B Shank must not touch edge of sink Lo ensure proper touch operation Adjust position of faucet above sink then tighten locking screws (5) using ยป Phillips screwdriver shown in insert E. [EJ SOLENOID VALVE INSTALLATION A Slide tube (a) into the top solenoid nipple (9).