Operation Manual

15
Button Action Effect
Press once when Zeppelin in standby Zeppelin turns on and selects last used source.
See also section Playback from a second source.
Press once when Zeppelin on Zeppelin goes to standby.
A docked iPod/iPhone is paused and turned off.
+
Press once Volume increases by small increment.
Press and hold Volume ramps up and LED flashes.
White LED indicates approaching maximum volume.
Red LED indicates maximum level.
–
Press once Volume decreases by small decrement.
Press and hold Volume ramps down and LED flashes.
Red LED indicates minimum level.
Press once Toggle play/pause (if iPod/iPhone is source)
Toggle mute on/off (if AUX is source)
Press once Go to start of next track (no effect for AUX)
Press and hold Scan forward through current track (no effect for AUX)
Press once Go to start of current track (no effect for AUX)
Press twice Go to start of previous track (no effect for AUX)
Press and hold Scan backwards through current track (no effect for AUX)
Press once Toggle between iPod/iPhone and AUX.
If AUX selected, a docked iPod/iPhone will pause.
If iPod/iPhone selected, it will play.
If no alternative source is connected, a red LED indicates invalid command.
Remote handset summary