Users Manual Part 1
4
3. Battery Charging
Your Bowers & Wilkins PI5 ships with the battery partially charged & may be used immediately. For
best practice we recommend to fully charge the earphones before first use. Please allow up to 3 hours
for full charge. The earphones can be used while charging.
To charge the PI5 ear buds:
1. Place the PI5 ear buds int the charge case
2. Close the charge case lid
To charge the PI5 charge case with cable:
1. Please use the supplied USB charging cable and connect the USB plug to a USB wall charger
or a powered computer USB socket.
2. Then connect the USB-C end to the charge case USB-C socket
Note: During charging, the charge case indicator will blink green. When fully charged, the indicator will
remain illuminated. The charge case can be charge with or without the ear buds being housed inside
the charge case
To charge the PI5 charge case with a wireless charging station:
1. Place the charging case onto a wireless charging station
2. Ensure that the rear of the charging case is on the charging station (with the case indicator
facing up
Note: During charging, the charge case indicator will blink green. When fully charged, the indicator will
remain illuminated.