- BOSS Digital Recorder Owner's Manual BR-600

85
Editing the Performance on a Track (Track Edit)
Rev0.10
Section 2
Perform the procedure given below to exchange the data
between two tracks.
Ex. : exchanging all the data on track 1 with all
the data on track 2
fig.02-590
1
Confirm that [PAD] is not lit, then press [UTILITY].
2
Press CURSOR [ ] [ ] to move the cursor to
“TRK,” and press [ENTER].
fig.02-600
3
Press CURSOR [ ] [ ] to move the cursor to
“XCG,” and press [ENTER].
fig.02-610
4
Use CURSOR [ ] [ ] and the TIME/VALUE dial
to select the two tracks/V-Tracks to exchange data.
5
When you are ready to execute the exchange, press
[ENTER].
The display will ask “Are you sure?,” so that you can
confirm the operation.
6
Press [ENTER].
The exchange is executed.
7
Press [UTILITY] (or press [EXIT] repeatedly) to return
to the Play screen.
* During updating, “Keep power on!” appears in the upper
line of the display, while the lower line shows what is being
processed.
Exchanging Data
(Track Exchange)
Track 1
Track 2
Track 1
Track 2
A
A
B
B
C
C
D
D
E
E
Time