- BOSS Digital Recorder Owner's Manual BR-600

164
Rev0.10
With Windows
When a memory card is full or when you want to save
important data to a computer, you can carry out a backup.
We recommend making frequent backups to minimize the
risk of losing data if a memory card becomes damaged.
1
Connect your computer and the BR-600 with a USB cable.
2
Confirm that [PAD] is not lit, and with the recorder
stopped, press [UTILITY].
3
Press CURSOR [ ] [ ] to move the cursor to
“USB,” and press [ENTER].
The USB screen appears in the display.
4
Select “BACKUP” with the TIME/VALUE dial, then
press [ENTER].
The Idling screen appears in the display.
* You cannot carry out the following procedure unless the
Idling screen is displayed. Refer to p. 214 for instructions on
resolving this problem.
The “BOSS_BR-600” (or “Removable disk (*:)”) icon is
added to the computer.
fig.05-060
5
Back up the data.
1) Click the “BOSS_BR-600” (or “Removable disk
(*:)”) icon.
2) Drag the “ROLAND” folder to the computer’s
folder and drop it in the folder.
fig.05-070
When you have finished backing up the data, the
Idling screen returns to the display.
6
Quit the connection to the computer.
With Windows XP
In My Computer, right-click on the “BOSS_BR-600”
icon (or “Removable disk (*:)” icon) to “Eject” the disk.
* If this procedure fails to eject the disk, use the procedure
below.
1)
Click the icon in the task tray, then click the
“Stop USB Disk–drive (*:)” message displayed there.
fig.05-080
2) Click [OK] in the “Safe To Remove Hardware”
dialog box that appears.
Saving BR-600 Data to
Computers (Backup)
The following types of song data are backed up.
Recorded data
Mixer status (pan, track EQ, etc.)
Insert effect song patches
Mastering Tool Kit song patches
Pitch Correction Song Patches and Correction
Event Maps
Rhythm Arrangements/Rhythm Patterns
Loop Effects
Tones from the Song Kit or imported with Tone Load
Utility (For a detailed explanation, refer to
“Parameter List” (p. 210).)
BOSS_BR-600
Removable Disk (*:)
(Ex.)
Task Tray
Task Bar