Data Sheet

Intrusion Alarm Systems | Photobeam 3000
Photobeam 3000
www.boschsecurity.com
u Dual beam detection improves false alarm immunity
u Range up to 90 m (300 ft) outdoors, 180 m (600 ft)
indoors
u Selectable response time
u Small unobtrusive design
The pole or surface mount Photo Beam Detector is
designed for indoor and outdoor applications.
System overview
Consisting of a separate transmitter and receiver, it is
designed to activate an alarm when an intruder passes
within the direct line of sight between the transmitter
and receiver.
Functions
The ICS-FPB1-W30DS has a range of 30 m (100 ft)
outdoors, or 60 m (200 ft) indoors. The ICS-FPB1-
W60DS a range of 60 m (200 ft) outdoors, or 120 m
(400 ft) indoors. The ICS-FPB1-W90DS a range of 90 m
(300 ft) outdoors, or 180 m (600 ft) indoors.
Mounting features
Mounting and installing the detector is now easier
than ever through easy-to-use mounting hole locations,
an enlarged entry point of access to accept small to
large, single or multiple cable set wires, side access
alignment test terminals for voltmeter connection,
front access sensitivity adjustment, built-in aiming
optics ensures improved alignment, and accessible
fastening screw locations that eliminate the need for
unnecessary crawling or bending during installation.
Dust/insect cover features
The included foam sealing on both sides of the
mounting plate ensures that the detectors are properly
secured from insects and other environmental
elements such as humidity and temperature
fluctuations.
The improved cover design includes water flow
channels to prevent water and dirt from accumulating
in front of optic components, and eliminates the need
for additional weatherproofing solutions.
Certifications and approvals
Region Certification
Europe CE EMC, RoHS [ISC-FPB1-W30DS, ISC-
FPB1-W60DS, ISC-FPB1-W90DS with
or without NH12T heater]