Technical data

56 en | Configuration Integrus

IOM-INT | V1.1 | 2010.12 Installation and Operation manual Bosch Security Systems B.V.

7.2.9 Configure auxiliary inputs

The way the signals on the auxiliary inputs (Aux-.L and Aux.-R) are handled can be set in the

Aux. Input Mode menu (4I).

When the option 'Stereo' is chosen, the signals on both Aux. inputs are distributed as a stereo

signal to all channels. This setting can for instance be used to transmit a music signal during

breaks in a conference. Note that the Transmission mode must be set to 'Aux to All' (menu

item 4A) to actually transmit this stereo signal.

The 'Stereo to Mono' and 'Mono+ Emergency' options can be selected when the transmitter is

used in combination with an interpretation system. The Aux. input(s) will be distributed to the

Symmetrical Audio Input and Interpreters Module. In this configuration the 'floor' signal

should be connected to the Aux. inputs.

7.2.10 Set sensitivity of the inputs

The sensitivity of the audio and Aux. inputs can be set in the Input Sensitivity menus (4J, 4K,

4L). The sensitivity can be set the same for all audio inputs (menu item 4L) or for each audio

input separately.

Channel numbers:

-00 ... 31 or -- Shows the channel numbers that are assigned

to the selected carrier. The symbol ‘- -’ is used

when less than 4 channels are assigned.

Menu Item Options Description

4I Aux. Input Type:

* - Stereo The Aux. inputs will be distributed in stereo to

all channels when the transmission mode

(menu item 1) is set to ‘Aux to All’.

- Stereo to Mono The Aux-L and Aux-R inputs are combined into

a mono signal and distributed to the

Symmetrical Audio Input and

InterpretersModule (when present).

- Mono + Emergency The Aux-L input is distributed to the

Symmetrical Audio Input and Interpreters

Module (when present). The Aux-R input is

distributed as emergency signal to all

channels when the emergency switchis

closed.

Menu Item Options Value Description

4J Level.Aux.L Level:

-6 ... +6 dB Set the required sensitivity for the left

auxiliary input.

4K Level.Aux.R Level:

-6 ... +6 dB Set the required sensitivity for the right

auxiliary input.

4J Level.Inputs Mode: Level: