Bosch Connected Control BCC100 Thermostat User Guide BoschHeatingAndCooling.
Contents Getting Started.......................2 Main Screen............................9 Icons.....................................10 Initialization..........................12 Wi-Fi Setup...........................16 App Setup.............................19 Starting Your System............21 Temporary Scheduling..........23 Programming Schedules.......24 Additional Features...............26 Advanced Features...............30 Warranty...............................
Getting Started The BCC100 thermostat is designed to work on most 24VAC low voltage heating and cooling systems such as gas and oil furnaces, heat pumps, and single or dual-stage systems. Professional installation recommended for: ▶▶ Humidifiers and dehumidifiers WARNING: Turn Off Power Failure to turn off power may result in electrical shock and/or system damage. Turn Off Power Please turn off the unit’s main power at the circuit panel before beginning the installation process.
2 Mount the New Wall Plate Use the enclosed screws and anchors to mount the new wall plate. In most cases, you can utilize the same mounting position of your old thermostat. Be sure to check the alignment of your wall plate before installation to ensure all holes are covered. 3 Connect the New Wall Plate CAUTION: To prevent possible shorts to adjacent terminals, use care when securing and routing your thermostat wires. Feed all wires vertically into the hole or slit in the center of the backplate.
NOTE: The following wiring diagrams describe some common configurations that are compatible with the BCC100. Not all compatible configurations are depicted below. If you are unsure of how to connect your thermostat, please contact customer support using the number on the card provided in the box. Conventional Systems Conventional systems include furnaces, boilers, and dedicated, non-window air conditioning units.
Single Stage Cool – Air Conditioner Ensure the system has a C-wire Ensure the pre-installed jumper wire remains between RH and RC Connect the R, C, Y1 and G wires from the Air Conditioner to RC, C, Y and G terminals on the wall plate, respectively Two Stage Heat – Furnance Ensure the system has a C-wire ---- Data G C W2/ AUX W/E Y Y2 O/B RH Jumper RC H/DH ---- Data G Ensure the pre-installed jumper wire remains between RH and RC W2/ AUX Connect the R, C, W1, W2 and G wires from the Furnac
Heat Pump Systems Heat pump systems are specialty designed to be able to provide heating and cooling using a single compressor, a reversing valve, and a fan Single Stage Heat Pump Ensure the system has a C-wire Ensure the pre-installed jumper wire remains between RH and RC Connect the R, C, Y1, O/B and G wires from the heat pump to RC, C, Y, O/B and G terminals on the wall plate, respectively ---- Data G C W2/ AUX W/E Y Y2 O/B RH Jumper RC H/DH Single Stage Heat Pump with Emergency Heat and Auxi
Humidifier and Dehumidifier Accessory A single Humidifier or Dehumidifier Accessory can be controlled using the BCC100. The thermostat only supports Humidifiers in heating operation, Dehumidifiers in cooling operation, and only one accessory per thermostat. Humidifier or Dehumidifier Accessory with a Combined Single Stage Heat and Cool Conventional System Note: The wiring configuration for humidifiers and dehumidifiers is the same for all type of Conventional Systems.
4 Attach BCC100 to the Wall Plate 1 CL IPS Align the two clips on the back of the BCC100 into the corresponding slots on the top of the wall plate. 2 Firmly press forward until you hear a click to secure the thermostat into position. PUSH Switch on the power to the heating/cooling system at the main switch box. If the thermostat does not power on, remove the BCC100 from the wall and ensure the RH/RC wire(s) and C-wire are correctly connected to both the appliance and the thermostat.
5 Enjoy the experience of the product! When your thermostat powers on, it prompts you to start the setup. If you are having trouble powering the thermostat, please refer to the Customer Support Card in the box for additional support information. Thank you for choosing the BCC100.
Icons Basic Icons Menu Heating Types Gas/Oil/ Propane Exit / Save Settings Heat Pump Back Electric Weather Schedule Fan Modes Device Settings Auto System Settings On Advanced Settings Circulation System Modes Humidity Heat Mode Humidifier Cool Mode Dehumidifier Auto Mode Emergency Heat Mode Off 10
Icons Unit Operation 1 2 Heat Mode Heating on (1st stage) & (2nd stage) 1 2 Cool Mode Cooling on (1st stage) & (2nd stage) 1 2 1 2 Auto Mode Heating on (1st stage) & (2nd stage) Auto Mode Cooling on (1st stage) & (2nd stage) Fan on/running - Fan Auto Mode 4 Emergency Heating Emergency heat on Auxiliary Heating Auxiliary heat on - 2nd Aux Stage of a 4-stage heating system System Connectivity Schedule on Device Schedule on Cloud Wi-Fi Connection Established Wi-Fi Connection Not Established Int
Initialization For a quick and easy way to begin using your new smart thermostat, the device will automatically direct you to the Initial Setup screen after you have turned it on for the first time. 1. Unit Configuration Select your home’s heating type, stage configuration for heating and cooling, and type of accessory (humidifier or dehumidifier) if available.
2. Date & Time ON DEVICE: Enter your location’s current date and time; after the device is registered or linked to a user account, the date and time on the device will automatically update to the current time associated with the user account. APP: The date and time for the device, as well as the user account, will automatically update by selecting the time zone for the device. 3.
4. Schedule During offline operations, only 2 schedules (Home and Vacation) are available. However, when a Wi-Fi connection is established, the list can be expanded up to 4 schedules. HOME: You can use this schedule to set your heating/ cooling equipment to predefined set points. The device initially comes with a factory default schedule, which can be adjusted as necessary.
5. Review In the final step, the BCC100 provides a review of all information that you have entered into the thermostat. You will be able to go back to different parts of the Initial Setup guide by pressing the different sections on the left pane.
Wi-Fi Setup Wi-Fi Connection SCAN: To start Wi-Fi setup, tap the Wi-Fi icon in the top right hand corner of the main screen. Then click the Scan icon to view available Wi-Fi networks. Follow the on-screen instructions to complete the Wi-Fi setup. Hidden Wi-Fi Connection MANUAL ENTRY: If you are trying to connect to a hidden network, press the SSID button to bring up the SSID screen. Enter your SSID into the text box, then follow the on-screen instruction to complete the Wi-Fi setup.
NOTE: If this is a first time installation, follow the instructions in the App Setup section of this User Guide to register your thermostat to your smart device.
For an unregistered device, click the green Registration button to register your account. If you want to register a different account to your device, you can also click the Registration button and follow the steps outlined in the App Setup section of this User Guide. Auto Reconnect If your device loses connection with your wireless network, it will automatically attempt to reconnect after 5 minutes. If that fails, it will make a new attempt every 15 minutes for the next 24 hours.
App Setup Congratulations! You are now connected to the thermostat. Now set up your App to enjoy additional exciting features. Step 1: Download BOSCH CONNECTED CONTROL COMPATIBLE DEVICES Apple® devices running iOS 7.1 & higher Android™ devices running 4.0.3 & higher There are three ways to download the BCC100 App for your smart device: ▶▶ In the App Store or Google Play, search “Bosch Connected Control” or “BCC100” and then download the app.
Step 2: Create a User Account After installing the App onto your smart phone, create a user account. After installing the App on your smart device, create a user account by clicking Register from the Login Screen. Follow the on-screen instructions to finish creating your account. Step 3: Add Device to your Account 1. Log in to your account. 2. Click Add New Device. 3. Follow on-screen instructions.
The Temporary Verification Code (TVC) is a 4-digit code randomly generated each time you enter the Registration screen on your thermostat. The code expires after 90 seconds. If the NOTE: The MAC ID is a previous code has unique network ID that expired, click the TVC to helps to identify your generate a new code. device over the internet.
Note that your device is always running on a programmed schedule and the current operating mode is part of that schedule. Thus, when you change the Mode, it will only change the mode for the current program. If you change to a different program, your Mode will follow the new program that you have selected. The mode selection is for the current program (Home). You cannot assign different modes within a program.
Temporary Scheduling Temporary Adjustment This feature will override the current set point in favor of the set point you enter until the next programmed time in the schedule. If you would like to permanently schedule the new set point, press the lock icon. This will permanently lock in the adjustment until the X button is pressed on the main screen.
Programming Schedules Programming a Schedule When the thermostat is offline, there are only two default schedules (Home and Vacation) available for selection. If the Internet connection is established, you may have up to 4 schedules. Programming with the Thermostat You can access the Schedule by following: Menu > Schedule and selecting the schedule that you would like to run. If you want to modify the schedule, you must first select the schedule you want to modify. 1.
Programming with the App From the main menu in the App, select Schedule. 1. Select the Mode that you would like the schedule to operate, and press Edit u If you would like to edit a different schedule please press List for a list of available schedules 2. Schedule Mon Tue Wed Thu Fri Sat Sun Home Periods: 4 55°-60° List Copy 1 00:30am-03:15am 72°-78° 2 03:15am-06:30am 66°-72° 3 06:30am-09:15am 55°-60° 4 09:15am-12:30am 68°-68° Select the day of the week you would like to change 3.
Additional Features Weather Forecast The weather forecast is NOTE: You must grant based on the location of “location access” for the installed thermostat. the app to enable The first time you connect this feature. your thermostat to the app, your location was assigned to the thermostat. Screen Options There are 3 levels of screen brightness and 3 options for Screen Timeout. You can also utilize this menu to Lock the screen. A 4-digit passcode will be required to lock the screen.
Unit Operating Mode Heat: The thermostat cycles your heating appliance to maintain your scheduled heating set point. Cool: The thermostat cycles your cooling appliance to maintain your scheduled cooling set point. Auto: The thermostat cycles your heating/cooling appliance to maintain your scheduled heating/cooling set points. Off: The thermostat turns off all heating/cooling functions. You can still manually operate the fan in this mode.
Humidifier & Dehumidifier NOTE: You may only Operating Mode operate in either You can enable automatic humidifier OR humidity control if the correct dehumidifier mode and humidifier or dehumidifier may not operate in both accessory was correctly wired modes at the same time. and configured during the thermostat’s initial setup. Based on the setup, the thermostat turns on the humidifier during heating operation and the dehumidifier will be turned on during cooling operation.
Temperature, Alerts, and Auto-On NOTE: Alerts are an Alert: Send an alert message additional source of or turn on the system protection for your automatically when the room heating/cooling temperature is out of the appliance. range between set-points. Run Time The thermostat keeps track of your run time for the Heating, Cooling, Air Filter and Water Pad. You can also set a reminder for Air Filter and Water Pad according to the number of calendar days.
Advanced Settings Advanced Settings allow HVAC professionals the ability to modify specific thermostat settings for better control of the heating/cooling appliance(s). NOTE: Advanced Settings are for professional use only and require access code: 1886. Heating & Cooling Click Main Menu > Advanced Settings > Heating & Cooling and then enter the Professional Access Code to gain access to Fan Delay, Minimum Run Time, Anti Short Cycle, Cycle Time and Zero Energy Band advanced settings.
Control Your BCC100 with Amazon Alexa Bosch offers one Smart Home Skill for integrating your BCC100 with Amazon Alexa’s voice controls. Using the Bosch Connected Control Skill from the Skills section of the Amazon Alexa App. You Can Control the BCC100 by Saying: ▶▶ Alexa, turn (Device Name) on. ▶▶ Alexa, turn (Device Name) off. ▶▶ Alexa, Increase (Device Name) by __ degrees. ▶▶ Alexa, Decrease (Device Name) by __ degrees. ▶▶ Alexa, Set (Device Name) to __ degrees.
Connecting Your BCC100 to Amazon Alexa 1. Download the BCC100 App, create an account, and register your app to the BCC100 thermostat. NOTE: You must have a registered BCC100 account to set up and use your thermostat with Amazon Alexa. 2. Download the Amazon Alexa app and set up your Alexa-enabled device. 3. In the Amazon Alexa app, click on the Menu button in the top left corner. 4. Click on the Skills section and search for “Bosch Connected Control” in the search bar at the top of the page. 5.
Warranty Bosch Connected Control BCC100 Thermostat Models Covered This limited warranty is provided by Bosch Thermotechnology Corp. (“Bosch”) and covers the Bosch Connected Control (BCC100) Wi-Fi Thermostat (hereinafter referred to as “Product”). This warranty is provided to the original purchaser of the Product as long as the Product remains installed at its original place of installation.
LIMITED WARRANTY OTHER THAN THE OBLIGATIONS OF BOSCH EXPRESSLY SET FORTH HEREIN, BOSCH DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. BOSCH’S SOLE OBLIGATION WITH RESPECT TO THE PRODUCT AND PURCHASER’S EXCLUSIVE REMEDIES ARE SET FORTH IN THE FOREGOING LIMITED WARRANTY.
Heating Cooling Hot Water Controls www.BoschHeatingAndCooling.com Bosch Thermotechnology Corp. Watertown, MA • Londonderry, NH • Ft. Lauderdale, FL Inquiries and support: 1-800-283-3787 Copyright © 2018 Bosch Thermotechnology Corp. All rights reserved. Subject to change without notice.
FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
IC Caution: - English: This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. - French: Le présentappareilestconf orme aux CNR d' Industrie Canada applicables aux appareils radio exempts de licence.
