Installation Manual
Table Of Contents
- Title Page
- Table of Contents
- Certifications, approvals, listings, and safety
- Introduction
- System overview
- Installation checklist
- Control panel installation
- Power supply
- Telephone communications
- IP communications
- Keypads, keyswitches, keyfobs and transmitters
- Keypads
- B915 Basic Keypad
- B920 Two-line Alphanumeric Keypad
- B921C Two-line Capacitive Keypad with Inputs
- B930 ATM Style Alphanumeric Keypad
- B942 Touch Screen Keypad
- Shortcuts and custom functions
- Address settings
- Supervision
- Installation and control panel wiring (keypads)
- Sensor loops overview and wiring (B921C/B942/B942W only)
- Output wiring (B942/B942W only)
- Troubleshooting
- Keyswitches
- RADION keyfobs and Inovonics pendant transmitters
- Keypads
- On-board outputs
- Off-board outputs
- On-board points
- Off-board points
- Wireless modules
- Access control
- Program and test the control panel
- Control panel board overview
- System wiring diagrams
- Approved applications
- Keypad Installer menu
- [1] Program menu
- [1] Reporting > [1] Phone menu parameters
- [1] Reporting > [2] Network menu parameters
- [1] Reporting > [3] Routing menu parameters
- [1] Reporting > [4] Personal Note menu parameters
- [2] Network > [1] Ethernet > (choose the bus module or on-board) > [1] Module Parameters menu
- [2] Network > [1] Ethernet > (choose the bus module or on-board) > [2] Address Parameters menu
- [2] Network > [1] Ethernet > (choose the bus module or on-board) > [3] DNS Parameters menu
- [2] Network > [2] Cellular > (choose the SDI2 cellular module or plug-in module)
- [3] RPS > [1] RPS Passcode menu parameters
- [3] RPS > [2] RPS Phone Number menu parameters
- [3] RPS > [3] RPS IP Address menu parameters
- [3] RPS > [4] RPS Port Number menu parameters
- [4] Area Options menu parameters
- [5] Keypad menu parameters
- [6] Users menu parameters
- [7] Points menu parameters
- [8] Disable Programming menu
- [2] Wireless menu
- [1] RF Point Menu> [1] Enroll Point RFID
- [1] RF Point Menu> [2] Replace Point RFID
- [1] RF Point Menu> [3] Remove Point RFID
- [2] RF Repeater Menu > [1] Add Repeater
- [2] RF Repeater Menu > [2] Replace Repeater
- [2] RF Repeater Menu > [3] Remove Repeater
- [3] RF Diagnostic Menu > [1] RF Points
- [3] RF Diagnostic Menu > [2] RF Repeater Menu
- [3] Diags menu
- [4] Serv Byp (Service Bypass) menu
- [5] Versions menu
- [6] Cloud menu
- [1] Program menu
- Specifications
- Appendix
- Back Page
Key
No
Req.
Opt .
1+
Not acceptable for this application.
Required for this application.
Optional for this application.
1 or more required for this application. Consult the appropriate standard.
1
For commercial applications using the B430, and when doing local or police station connect applications, the
D8108A Enclosure is required for all applications.
2
Check for availability in your region.
3
B6512 only.
Standby battery requirements and calculations
Standby battery calculations
UL 365 requires 72 hours of standby battery capacity. Limit the auxiliary power current for all
devices, including keypads, to 80 mA or less to meet this requirement.
A B C
AC Power On Normal
Current (mA)
AC Power Off Minimum
Current (mA)
In Alarm Maximum
Current (mA)
Model Number Qty
Used
Each
Unit
Qty Total Each
Unit
Qty Total Each
Unit
Qty Total
B6512/B5512/
B4512/B3512
______ 125 x 1 = 125 125 x 1 = 125 155 x 1 = 155
B201 ______ 18 x Qty = ______ 18 x Qty = ______ 35 x Qty = ______
B208 ______ 35 x Qty = ______ 35 x Qty = ______ 35 x Qty = ______
B308
1
______ 22 x Qty = ______ 22 x Qty = ______ 22 x Qty = ______
B426 ______ 100 x Qty = ______ 100 x Qty = ______ 100 x Qty = ______
B430 ______ 5 x 1 = ______ 5 x Qty = ______ 25 x 1 = ______
B440 ______ 35 x 1 = ______ 35 x 1 = 35 150 x 1 = ______
B441 ______ 35 x 1 = ______ 35 x 1 = 35 150 x 1 = ______
B442 ______ 35 x 1 = ______ 35 x 1 = 35 150 x 1 = ______
B443 ______ 35 x 1 = ______ 35 x 1 = 35 150 x 1 = ______
B450
2
______ 30 x Qty = ______ 30 x Qty = ______ 30 x Qty = ______
B520 ______ 15 x Qty = ______ 15 x Qty = ______ 15 x Qty = ______
B810 ______ 100 x Qty = ______ 100 x Qty = ______ 100 x Qty = ______
B820 ______ 100 x Qty = ______ 100 x Qty = ______ 110 x Qty = ______
B901 ______ 110 x Qty = ______ 100 x Qty = ______ 110
6
x Qty = ______
B915/B915I ______ 35 x Qty = ______ 35 x Qty = ______ 70 x Qty = ______
B920 ______ 35 x Qty = ______ 35 x Qty = ______ 70 x Qty = ______
B921C ______ 45 x Qty = ______ 45 x Qty = ______ 85 x Qty = ______
19.4
Control Panel Approved applications | en 99
Bosch Security Systems, Inc. Installation and System Reference Guide 2016.05 | 14 | F.01U.287.180