Installation Instructions

Introduction
This section includes an introduction to documents for this
product and other document-related instructions.
About documentation
This document contains instructions for a trained installer to
properly install, configure, and operate this control panel, and
optional peripheral devices. Review this document before
beginning the installation to determine the hardware and wiring
requirements for the features used.
(Bosch Security Systems, Inc. recommends that installers follow
good wiring practices such as those descibed in NFPA 731,
Standard for the Installation of Electronics Premises Security
Systems.)
Throughout this document, the words “control panel” refer to all
control panels covered by this document (B5512/B5512E/
B4512/B4512E/B3512/B3512E).
Notifications
This document uses Notices, Cautions, and Warnings to draw
your attention to important information.
Notice!
These include important notes for successful operation and
programming of equipment, or indicate a risk of damage to the
equipment or environment.
!
Caution!
These indicate a hazardous situation which, if not avoided,
could result in minor or moderate injury.
!
Warning!
These indicate a hazardous situation which, if not avoided,
could result in death or serious injury.
1
1.1
Control Panels Introduction | en 5
Bosch Security Systems, Inc. 2015.09 | 08 | F.01U.287.185