Assembly Instructions

4
Preventing material damage
NOTICE:
The high weight of the appliance may damage the floor when it is moved.
▶
Use a hand-cart and floor protection when moving the appliance.
When the appliance door is closed, the mullion rail should be closed (flush with the door
edge) or damage may occur.
▶
Never open the mullion rail manually.
▶
If the mullion rail has been opened, rotate it closed (flush with the door edge) before clos-
ing the appliance door.
Using the base, runners or appliance doors as a seat or climbing surface may damage the
appliance.
▶
Do not stand or lean on the base, runners or doors.
If the water pressure is too high or too low, this may impair functioning of the appliance.
▶
Make sure that the water pressure in the water supply system is at least 29psi (200kPa)
and max. 116psi (800kPa).
Modified or damaged water hoses may result in material damage and damage to the appli-
ance.
▶
Never kink, crush, modify or cut through water hoses.
▶
Never re-use water hoses that have been used before.
▶
Never pull on the water hose on the rear panel of the appliance.