Technical data

64 0804 - 0805 00 0869 1 0933 15
Value Range: 00 = zone not
used, 1 - 16 = Area 1- 16
Value Range:0–15. See
Section Zone Functions,
page 26.
0 = On-Board zone
1 = Keypad zone
2 = DX2010 Zone*
3 = RF Device
15 = not used
* See next table
Notice!
When a zone is assigned to RF Device (3), then the dedicated zone on DX2010 is not
available.
Module Address
DX2010 module 1 (zones 17 - 24) 103
DX2010 module 2 (zones 25 - 32) 104
DX2010 module 3 (zones 33 - 40) 105
DX2010 module 4 (zones 41 - 48) 106
DX2010 module 5 (zones 49 - 56) 107
DX2010 module 6 (zones 57 - 64) 108
See also
– Zone Programming, page 26
Output Programming
On-board Output Programming
Option Address Default
Keypad Alarm Tone, 0 = Disabled, 1 = Enabled 0503 1
Siren Running Time, 00 - 99 = 0 - 99 minutes 0508 - 0509 00
See The Value Ranges of Output Programming Options, page 39
Output 1 Output Event Type 0510 - 0511 05
VDS-A
EN=5
Output Area / Zone 0512 - 0513 00
Output Mode 0514 0
VDS-A EN=0
Output Time 0515 - 0517 180
VDS-A
EN=180
Output 2 Output Event Type 0518 - 0519 05
VDS-A
EN=5
Output Area / Zone 0520 - 0521 00
Output Mode 0522 0
VDS-A EN=0
4.4.3
38 en | Configuration
AMAX panel 4000 / AMAX panel 4000
EN
2013.07 | 03 | F.01U.267.113 Quick Start Guide Bosch Sicherheitssysteme GmbH