User manual

27
Unbypass a Point
 I have this feature.
 I do not have this feature.
 This feature requires a passcode.
Unbypassing a point is a way to return a bypassed point to the security system so
it can respond to trouble and alarm conditions.
COMMAND 0 0
To Unbypass a Point:
1. Ensure your security system is disarmed.
2. Press the [COMMAND] bar. The Command mode indicator light
comes on.
3. Press the [0] key, then press the [0] key again. The system is now the
Unbypass mode.
4. To unbypass a point, press the number key that corresponds to the
number of the point that is flashing slowly, and then press the [ENT]
key. The point status light stops flashing, indicating the point is
unbypassed.