Specification

ManualsBrandsBoral ManualsBuilding materialsVersetta 36 in. x 8 in. Stone Carved Block Sea Salt Stone Veneer Flat Panel (6-Bundles per Box)

 DrJ is an ISO/IEC 17065 accredited product certification body through ANSI Accreditation Services.

 DrJ provides certified evaluations that are signed and sealed by a P.E.

 DrJ’s work is backed up by professional liability insurance.

 DrJ is fully compliant with IBC Section 1703.

6300 Enterprise Lane ● Madison WI 53719 ● 608-310-6748 ● drjengineering.org

Versetta Stone

Panelized Stone Veneer

Applications Over Continuous Insulation

TER No. 1212-01

Boral Stone Products LLC

Issue Date: March 5, 2013

Updated: March 22, 2018

Subject to Renewal: April 1, 2019

200 Mansell Court East, Suite 310

Roswell, GA 30076

419-318-5345

949-341-8890 (fax)

chris.hines@boral.com

versettastone.com

DIVISION: 07 00 00 – THERMAL AND MOISTURE PROTECTION

Section: 07 44 53 – Glass Fiber Reinforced Cementitious Panels

Section: 07 44 63 – Fabricated Faced Panel Assemblies

1. Product Evaluated:

1.1. Versetta Stone

Panelized Stone Veneer

1.2. For the most recent version of this Technical Evaluation Report

(TER), visit drjengineering.org. For more detailed state professional

engineering and code compliance legal requirements and references,

visit drjengineering.org/statelaw. DrJ is fully compliant with all state

professional engineering and code compliance laws.

1.3. This TER can be used to obtain product approval in any country that

is an IAF MLA Signatory (all countries found here) and covered by an

IAF MLA Evaluation per the Purpose of the MLA (as an example,

see letter to ANSI from the Standards Council of Canada).

Manufacturers can go to jurisdictions in the U.S., Canada and

other IAF MLA Signatory Countries and have their products readily

approved by authorities having jurisdiction using DrJ’s ANSI

accreditation.

1.4. Building code regulations require that evaluation reports are provided

by an approved agency meeting specific requirements, such as those

found in IBC Section 1703. Any agency accredited in accordance with

ANSI ISO/IEC 17065 meets this requirement within ANSI’s scope of

accreditation. For a list of accredited agencies, visit ANSI’s website.

For more information, see drjcertification.org.

Summary of content (10 pages)

PAGE 1
Versetta Stone® Panelized Stone Veneer Applications Over Continuous Insulation TER No. 1212-01 Issue Date: March 5, 2013 Updated: March 22, 2018 Subject to Renewal: April 1, 2019 Boral Stone Products LLC 200 Mansell Court East, Suite 310 Roswell, GA 30076 419-318-5345 949-341-8890 (fax) chris.hines@boral.com versettastone.com DIVISION: 07 00 00 – THERMAL AND MOISTURE PROTECTION Section: 07 44 53 – Glass Fiber Reinforced Cementitious Panels Section: 07 44 63 – Fabricated Faced Panel Assemblies 1.
PAGE 2
Technical Evaluation Report (TER) 1.5. Requiring an evaluation report from a specific private company (i.e. ICC-ES, IAPMO, CCMC, DrJ, etc.) can be viewed as discriminatory and is a violation of international, federal, state, provincial and local anti-trust and free trade regulations. 1.6. DrJ’s code compliance work: 1.6.1. Conforms to code language adopted into law by individual states and any relevant consensus based standard such as an ANSI or ASTM standard. 1.6.2.
PAGE 3
Technical Evaluation Report (TER) 4.4. A 0.0217"-thick painted G90 galvanized steel nailing flange is molded along the top edge of the panels for attachment to the framing and/or nail base. 4.5. The bottom edge and the ends of the panels fit together using tongue-and-groove technology. 4.6. The panels have an installed weight of approximately 8.5 psf (17 lbs. per panel). 4.7. Additionally, the stone veneer panels are supplemented with various accessories to aid with installation.
PAGE 4
Technical Evaluation Report (TER) Nails Screws Thickness of Continuous Insulation Fastener Diameter Fastener Length1 0" 0.5" 1.0" 0.120" 2.5" x x x 0.131" 2.5" x x x n 0.148" 3" x x x x n 0.162" 3.5" x x x x x n 0.192" 4" x x x x x x #8 screw (0.164") 2" x x x n n n #10 (0.190") 2.5" x x x x n #12 (0.216") 3" x x x x #14 (0.242") 4" x x x x 1.5" 2.0" 2.5" 3.0" 3.5" 4" n n n n n n n x n n n n x x x n n 1.
PAGE 5
Technical Evaluation Report (TER) Exposure Category B C D Mean Roof Height Wind Speed, (mph) (Vult/Vasd) 15' 20' 25' 30' 35' 40' ≤ 110/85 ST ST ST ST ST STVB 115/90 ST ST ST ST ST STVB 120/95 ST ST ST ST ST STVB 130/100 ST ST ST ST STVB STVB 140/110 STVB STVB STVB STVB STVB STVB 150/115 STVB STVB STVB STVB STVB STVB 160/125 STVB STVB STVB STVB NP NP ≤ 110/85 ST ST ST ST STVB STVB 115/90 ST ST STVB STVB STVB STVB 120/95 ST STVB STV
PAGE 6
Technical Evaluation Report (TER) Exposure Category B C D Mean Roof Height Wind Speed, Vult (mph) 15' 20' 25' 30' 35' 40' 110 29.1 29.1 29.1 29.1 30.6 31.7 115 31.9 31.9 31.9 31.9 33.5 34.8 120 34.7 34.7 34.7 34.7 36.4 37.8 130 40.7 40.7 40.7 40.7 42.7 44.4 140 47.2 47.2 47.2 47.2 49.6 51.4 150 54.2 54.2 54.2 54.2 56.9 59.1 160 61.7 61.7 61.7 61.7 64.8 67.3 180 78.0 78.0 78.0 78.0 81.9 85.0 200 96.3 96.3 96.3 96.3 101.1 105.
PAGE 7
Technical Evaluation Report (TER) 6.1.5. 6.2. All other installation and flashing details germane to the project shall be in accordance with the applicable building code and the manufacturer’s installation instructions. Wood-Framed Walls 6.2.1. Versetta Stone® shall be installed over nailable structural sheathing capable of resisting 100% of the design wind loads and shall be attached, at a minimum, in accordance with Table 1. 6.2.2.
PAGE 8
Technical Evaluation Report (TER) 7.11. The provisions of model, state or local building codes for building construction do not intend to prevent the installation of any material or to prohibit any design or method of construction. Alternatives shall use consensus standards, performance-based design methods or other engineering mechanics based means of compliance. This TER assesses compliance with defined standards, accepted engineering analysis, performance-based design methods, etc.
PAGE 9
Technical Evaluation Report (TER) 9.3.1. Installation shall comply with the manufacturer’s installation instructions and this TER. In the event of a conflict between the manufacturer’s installation instructions and this TER, the more restrictive shall govern. 9.3.2. Installation shall be on exterior walls consisting of wood or steel framing and sheathing capable of supporting the imposed loads, including transverse wind loads. 9.3.3.
PAGE 10
Technical Evaluation Report (TER) 9.5.5. The actual design, suitability and use of this TER, for any particular building, is the responsibility of the Owner or the Owner's authorized agent, and the TER shall be reviewed for code compliance by the Building Official. 9.5.6.