Missing part? Damaged? Contact us via email at service@domioutdoorliving.com www.domioutdoorliving.com © Copyright 2022-2024 domi LLC. I All Rights Reserved.
！ Us ebol t st os ecur et hef r amet ot hegr oundt oagai ns tt hes t r ongwi nd.
Pole Beam Beam Beam Beam Corner Roof Bar Corner Roof Bar Connector Roof Bar Solidfying Bar Solidfying Bar Solidfying Bar Finishing Bar Finishing Bar Finishing Bar Finishing Bar Finishing Bar
Finishing Bar Finishing Bar Finishing Bar Finishing Bar Finishing Bar Roof Panel Roof Panel Roof Panel Roof Panel Roof Panel Roof Panel Roof Panel Roof Panel Roof Panel Roof Panel Roof Panel
Roof Panel Roof Panel Roof Panel Roof Panel Roof Panel Roof Panel Roof Panel Roof Panel Net Frame Net Frame Net Frame Base Joint Cover Union Bar Inside Roof Connector Outside Roof Connector Corner Solidifying Bar J-Hook Joint Cover Corner Solidifying Bar Bracket
Bracket Hook Bracket Spacer Bracket Joint Cover Bracket Corner Cover Finishing End Finishing End Solid Sidewall Plastic Bracket Plastic Bracket Plastic Bracket Plastic Bracket Mosquito Sidewall Plastic Bracket
(1) Attach 2 Part #B1 to Part #A with 4 Bolts #8. (2) Attach 2 Part #B2 to Part #A with 4 Bolts #6. (3) Attach Part #B to Part #A with 3 Bolts #8. (4) Repeat the above procedures to assemble the other 3 Part #A.
(1) Insert Part #C2 into Part #C1 and secure with 3 Bolts #8. (4) Insert Part #X into the beam. (2) Insert the other side of Part #C2 into Part #C and secure with 3 Bolts #8. (3) Connect Part #C1 and Part #C through Part #C2. (5) Secure the bottom of Part #X and Part #C/C1 with 3 Bolts #8. (6) Repeat the above procedures to assemble the other Part #C and Part #C1.
(1) Insert Part #C2 into Part #D, and secure with 3 Bolts #8. (4) Insert Part #X into the beam and secure with 1 Bolt #8. (2) Insert the other side of Part #C2 into Part #D1 and secure with 3 Bolts #8. (3) Connect Part #D and Part #D1 through Part #C2. (5) Secure the bottom of Part #X and Part #D/D1 with 3 Bolts #8. (6) Repeat the above procedures to assemble the other Part #D and Part #D1.
(1) Connect Part #C/C1 and #D/D1 to Part #A with 8 Bolts #4. (From Outside) (2) Repeat the above procedures to assemble the other 3 corners. Please don't tighten all bolts.
(1)Connect Part #C/C1 and #D/D1 to Part #A with 4 Bolts #8. (From Inside) (2) Repeat the above procedures to assemble the other 3 corners. Please don't tighten all bolts.
(1) Affix Part #R and Part #R1 to the frame with 8 Bolts #8. (2) Repeat the above procedures to assemble the other 3 corners. Please don't tighten all bolts.
(1) Cover the corner with Part #X1. (2) Secure with 2 Self-tapping Screws #3. (from top to bottom) (3) Secure with 2 Self-tapping Screws #3. (from bottom to top) (4) Repeat the above procedures to assemble the other 3 corners. Tighten all bolts.
Assemble the 4 Corner Roof Bars: (1) Connect Part #E1 and Part #E with 2 Bolts #8 . (2) Attach Part #U to Part #E with Bolt #8 . (3) Repeat the above procedures to assemble the other 3 Corner Roof Bars.
Please have a freestanding ladder ready at the center of the gazebo. (1) Place 4 Part #E1 on the 4 corners of Part #S. Secure with 8 Bolts #8 (from bottom to top) ATTENTION: You can also finish this step on the ground and then lift 4 corner roof bar and inside roof connector to the top together. (Need 2 people and 2 ladder) Outside View Outside View (2) Place 4 Part #E on 4 Part #A; Secure with 8 Bolts #8.
(1) Attach Part #U1 to Part #E2 with Bolt #7 . 15 (2) Repeat the above procedures to assemble the other 3 roof bars.
(1) Place Part #E2 on Part #S. Secure with Bolt #8 (from bottom to top). Outside View Inside View (2) Connect Part #E2 and the Assembled Beam(D&D1) with part #U1. Secure with 2 Bolts #8. (3) Repeat the above procedures to assemble the opposite side.
(1) Place Part #E2 on part #S. Secure with Bolt #8 (from bottom to top). Outside View Inside View (2) Connect Part #E2 and the Assembled Beam(C&C1) with part #U1. Secure with 2 Bolts #8 . (3) Repeat the above procedures to assemble the opposite side.
Secure Part #T to Part #S and Part #S1. (From Bottom to Top) ATTENTION: The holes of Part #S and Part #S1 need to be aligned, on the same vertical line.
Inside View (1) Insert Part #U3 into Part #G and Part #G1. (2) Attach Part #G and Part #G1 to the Part #E2 with 1 Bolt #7 and 2 Blots #8. (3) Repeat the above procedures to assemble the opposite side.
Inside View (1) Insert Part #U3 into 2 Part #F. (2) Attach 2 Part #F to the Part #E2 with 1 Bolt #7 and 2 Blots #8. (3) Repeat the above procedures to assemble the opposite side.
(1) Insert Part #U2 into Part #F and Part #G1. (2) Secure with 2 Bolts #8. (3) Secure them to Part #E with Bolt #8. (4) Repeat the above procedures to assemble the other 3 sides.
(1) Insert Part #U2 into Part #F and Part #G. (2) Secure with 2 Bolts #8. (3) Secure them to Part #E with Bolt #8. 22 (4) Repeat the above procedures to assemble the other 3 sides.
(1) Connect Part #J1 and Part #Q1 with 2 Bolts #7 and 2 Nuts #5. (2) Connect Part #J2 and Part #Q2 with 2 Bolts #7 and 2 Nuts #5.
Inside View (1) Place the Assembled J1 & Q1 and J2 & Q2 on Part #E2, securing with 1 Bolt #8. 24 (2) Repeat the above procedures to assemble the opposite side.
(1) Connect Part #J and Part #Q with 2 Bolts #7 and 2 Nuts #5. (2) Place the Assembled Part #J & #Q on Part #E2, securing with 1 Bolt #8. 25 （3) Repeat the above procedures to assemble the opposite side.
(1) Place Part #J and Part #J1 on Part #E; put on Part #X3 and secure with Self-tapping Screw #2. Inside View 26 Inside View (2) Repeat the above procedures to assemble the other 3 corners.
Cover Part #Z, #Z1 & #Z2 to Roof Panels.
Cover Part #Z to Roof Panels.
ATTENTION: The bigger roof panel need to cover the smaller one. (1) Insert Part #N1 and Part #N2 into the frame. 29 (2) Insert Part #N3 and Part #N2 into the frame. (3) Repeat the above procedures to assemble the opposite side.
(1) Place Part #H1 and Part #H2 on Part #E2; put on Part #X2 and secure with Bolt #8. (2) Repeat the above procedures to assemble the opposite side.
(1) Insert Part #L1 into the frame. (2) Insert Part #L2 into the frame. (3) Attach Part #H to Part #E2, securing with Bolt #8. 31 (4) Repeat the above procedures to assemble the opposite side.
(1) Place Part #H and Part #H2 on Part #E1; put on Part #X3 and secure with Self-tapping Screw #2 Outside View (2) Repeat the above procedures to assemble the other 3 corners.
Cover Part #Z# , Z3 & #Z4 to Roof Panels Section View 33
Cover Part #Z & #Z1 to Roof Panels 34
Cover Part #Z & #Z2 to Roof Panels 35
#9 Part #W should be inserted between roof panels and solidifying bar or beams, then secure with bolts and nuts.
ATTENTION: The bigger roof panel need to cover the smaller one. 14 (1) Insert Part #P1, Part #P2 and Part #P3 into the frame. 14 (3) Place 1 Part #W between roof panels and solidifying bars. Then secure with 1 Bolt #12 and 1 Nut #5. 12 2 (2) Place 6 Part #W between roof panels and beams. Then secure with 6 Bolts #10 and 6 Nuts #5. 37 (4) Repeat the above procedures to assemble the opposite side.
ATTENTION: The bigger roof panel need to cover the smaller one. 16 (1) Insert Part #P8, Part #P7 and Part #P6 into the frame. 16 (3) Place 1 Part #W between roof panels and solidifying bars. Then secure with 1 Bolt #12 and 1 Nut #5. 14 2 (2) Place 7 Part #W between roof panels and beams. Then secure with 7 Bolts #10 and 7 Nuts #5. 38 (4) Repeat the above procedures to assemble the opposite side.
ATTENTION: The bigger roof panel need to cover the smaller one. (1) Insert Part #P4 and Part #P5 into the frame. (3) Place 4 Part #W between roof panels and solidifying bars. Then secure with 4 Bolts #12 and 4 Nuts #5. (2) Place 9 Part #W between roof panels and beams. Then secure with 9 Bolts #10 and 9 Nuts #5. 39 (4) Repeat the above procedures to assemble the opposite side.
(1) Place 2 Part #W between Part #P5 and Part #E2. Then secure with 2 Bolts #9 and 2 Nuts #5. (2) Repeat the above procedures to assemble the opposite side.
ATTENTION: The bigger roof panel need to cover the smaller one. (1) Insert Part #M1 and Part #M2 into the frame. (2) Insert Part #M6 and Part #M5 into the frame. (3) Place 8 Part #W between roof panels and beams. Then secure with 8 Bolts #10 and 8 Nuts #5. (4) Place 2 Part #W between roof panels and solidifying bars. Then secure with 2 Bolts #12 and 2 Nuts #5. 41 (5) Repeat the above procedures to assemble the opposite side.
ATTENTION: The bigger roof panel need to cover the smaller one. (1) Insert Part #M3 into the frame. (3) Place 2 Part #W between roof panels and solidifying bars. Then secure with 2 Bolts #12 and 2 Nuts #5. (2) Insert Part #M4 into the frame. 42 (4) Place 6 Part #W between roof panels and beams. Then secure with 6 Bolts #10 and 6 Nuts #5. (5) Repeat the above procedures to assemble the opposite side.
(1) Place 2 Part #W between roof panels and Part #E2. Then secure with 2 Bolts #9 and 2 Nuts #5. (2) Repeat the above procedures to assemble the opposite side.
(1) Place Part #K2 and Part #K3 on Part #E2; Put on Part #X2 and secure with Bolt #8. (2) Repeat the above procedures to assemble the opposite side.
(1) Place Part #K and Part #K1 on Part #E2; Put on Part #X2 and secure with Bolt #8. (2) Repeat the above procedures to assemble the opposite side.
X3 (1) Place Part #K3 and Part #K on Part #E; Put on Part #X3 and secure with Self-tapping Screw #2. (2) Repeat the above procedures to assemble the other 3 corners.
(1) Attach roof panels to finishing bars with 2 Self-tapping Screws #3. (2) Repeat the above procedures to assemble the other 3 sides.
How to Put the 112 Hooks into the Double-track 6 Hooks × 2 Rows 8 Hooks × 2 Rows 6 Hooks × 2 Rows 8 Hooks × 2 Rows 8 Hooks × 2 Rows 6 Hooks × 2 Rows 8 Hooks × 2 Rows 6 Hooks × 2 Rows Double-track 48
(1) Place 6 hooks on each slot of the Sidewall Track(C1&C). (2) Install Part #T1 at the joint of Part C&C1 with Bolt #8. Double-track 49 (3) Repeat the above procedures to assemble the opposite side.
(1) Place 8 hooks on each slot of the Sidewall Track(D&D1). (2) Install Part #T1 at the middle of Part D&D1 with Bolt #8. Double-track 50 (3) Repeat the above procedures to assemble the opposite side.
Hang up Mosquito Sidewalls to Inside Track 51
Hang up Solid Sidewalls to Outside Track 52
Thanks for your purchase. At domi outdoor living, we believe in our products. That’s why we provide a 12-month warranty and friendly, casy-to-reach after-sales service. So if you have any questions about our product and assembly,please feel free to contact us. We will be here for you. Support: After-sales contact email: service@domioutdoorliving.com Please tell us your order ID when contact. Attach photos of damaged part for instant reply. © Copyright 2022-2024 domi LLC. I All Rights Reserved.
