User Manual

ManualsBrandsBOLLNG ManualsCamera & PhotoPTZ Camera Outdoor WiFi Wireless Security Camera 5MP 30X Optical Zoom IP Camera Support 492ft Night Vision Auto Tracking Sound Light Alarm Human Detection 2-Way Audio IP66 Waterproof

Table Of Contents

1. How to first add WIFI IP Camera by Camhipro APP

1. How to first add WIFI IP Camera by Camhipro APP (Connect

Network cable)?

1.1 Connection network cable to router and plug in power adapter.

1.2 Connect LAN cable and power to camera, it needs about one minute to self checking and

then start working.

Tips: The router must be able to connect to the internet! Please use the standard power supply.

1.3 Network indicator light (green): always flashing means network data transmission is normal.

1.4 Download “Camhipro”, “Camhi” APP in Google Play or Apple Store, or Scan QR as follows; and

Install, connect the mobile phone to the WIFI network, enter the APP and click “Add Device

button” to enter the Add Device interface.

1.5 Steps: Configure WIFI IP Camera Configuration

1)add device ”IP Camera”;

2)Add New device(first use);

3)Power is on;

4)Next Step-Connected Network Cable;

5)Device on Lan;

6)UID(default user name and password admin);

7)Configure wireless and add device

8)Select local wireless

9)Choose local wireless device and input local network password;

10)WIFI IP Camera name Setting

11)Make device on Line;

Summary of content (7 pages)

PAGE 1
. How to first add WIFI IP Camera by Camhipro APP (Connect Network cable)? 1.1 Connection network cable to router and plug in power adapter. 1.2 Connect LAN cable and power to camera, it needs about one minute to self checking and then start working. Tips: The router must be able to connect to the internet! Please use the standard power supply. 1.3 Network indicator light (green): always flashing means network data transmission is normal. 1.
PAGE 2
3
PAGE 3
4
PAGE 4
2. How to Connect WiFi IP Camera by Hot-Spot Camhipro APP (No Network Cable)? 2.1 Go to your cell phone’s Wi-Fi Setting -- search Wi-Fi signals -- connect the Wi-Fi. The name of Wi-Fi Hot Spot is the UID on the camera (Wi-Fi name:IPCAM-900139 Camera default Wi-Fi Hot Spot password: 01234567 Tips: 1. Do not connect network Cable; 2. Only when the mobile phone is 3-5 meters away from the camera can the hot spot signal be detected, please close the mobile data when connect the camera Hot Spot; 3.
PAGE 5
Step1 Step2 Step4 Step3 Step5 2.
PAGE 6
Step1 Step2 Step3 3. WIFI IP Camera How to reset password when forget password？ 3.1 Method B: Please restore the camera to factory settings: Method 1: Press the reset button for more than 10 seconds and make sure that the camera remains on. After about 60 seconds, the camera will successfully restore the factory settings, and then set up WiFi for the camera on the phone again.
PAGE 7
Method 2: Open the mobile APP → enter the camera settings → select "system settings" → click "restore factory settings" 3.2 Method A: When your PC and camera are in the same local area network (usually means they are connected to the same router), you can reset the camera password on the "SearchTool". Step 1. Open "SearchTool" on the PC. Step 2. Click "Refresh" to search the camera IP, then select the IP address and click "Next". Step 3.