Installation Guide

Installation
1.) On the left hand side of the gate,
using rod quide (C) as template, mark
and pre-drill
1
⁄
1
⁄
1
8
⁄8⁄
" holes 35" from the
ground surface on the gate upright.
2.) Assemble and install the latch (B),
rod quide (C), and plastic binder (D)
with provided screws.
4.) Attach the two pieces of the
drop rod (A) together. Flip
up the plastic binder (D) and
insert the drop rod (A) through
the latch (B), rod guide (C),
plastic binder (D) and bottom
rod quide (C). The plastic
binder (D) will lock the rod in
the up right position. Install
the cotter pin (H).
5.) On the right hand side
of the gate, hold up the
latch catch (E) and close
the gate to align the latch
with the catch mechanism.
Mark the holes. Pre-drill
with
1
⁄
1
⁄
1
8
⁄8⁄
" bit, then mount the
latch catch (E) using the
provided screws.
6.) Measure, pre-drill
1
⁄
1
⁄
1
8
⁄8⁄
" holes
and attach handles (F) at the
desired location on the gate
using provided screws.
The drop rod can be secured
with a padlock.
3
gate upright
gate upright
gate upright
gate upright
35 in.
gate upright
gate upright
gate upright
Left Panel
Right Panel
Right Panel
Left Panel
DIY Framed Gate
PRO Framed Gate
35 in.
35 in.
D
C
C
B
A
H
E
3.) Install the second rod guide (C) on
the gate above the bottom rail
with provided screws.