Specification Sheet

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Rev. 4/19/21
R/B
Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2021 by Bobrick Washroom Equipment, Inc.
Technical Data
continued . . .
MIRROR WITH
STAINLESS STEEL
CHANNEL FRAME
Designer's Notes:
1. Special-order sizes available on request.
2. Maximum size mirror available, 96" x 72'' (244 x 183cm); minimum size, 12" x 12" (30 x 30cm).
3. All Bobrick framed mirrors are manufactured to overall width and height dimensions. EXAMPLE: A 24" x 36''
(61 x 91cm) mirror will be furnished 24'' x 36'' (61 x 91cm) outside-of-frame to outside-of-frame.
4. To specify special sizes use Series Number followed by width x height in inches. EXAMPLE: B-165 2024 20" x
24" (51 x. 61cm)
5. Bobrick framed mirrors are manufactured to a tolerance 1/8'' (3.2mm).
6. For su󰀩cient space to lift mirror onto wall hanger(s), provide 1" (25mm) minimum clearance above top of
mirror frame.
7. Provide 1/2'' (12.7mm) minimum clearance on each side.
B-165
SERIES
Note: Mirrors greater than 36" in width will have multiple
hanger brackets with a typical 8" o󰀨 each edge.
Snap Locking Design
(Rear View)
"2S" Tab Design
(Rear View)
- for all other mirrors up to a width of 36"
Figure: 1 Figure: 2
3/4''
19mm
2-1/2''
65mm
S
2-9/16''
65mm
S
4'' or 5" Typ.
100 or 125mm
S
Side View
Back Plate/Wall Hanger
Frame
Mirror
Finish Face of Wall
Frame
Mirror
S
S
S
1" to 1-1/2"
25mm to 40mm
S
(Does not engage with lower Louvers)
Half
Mirror Width
4"
100mm Typ.
Mirror
Bracket
w/Tape
2-7/8"
75mm
Mirror
Bracket
1/2"
13mm
Finish Face
of Wall
B-165 1824 18'' (46cm) 24'' (61cm)
B-165 1830 18'' (46cm) 30'' (76cm)
B-165 1836 18'' (46cm) 36'' (91cm)
B-165 2430 24" (61cm) 30" (76cm)
B-165 2436 24'' (61cm) 36'' (91cm)
B-165 2448 24'' (61cm) 48'' (122cm)
B-165 2460 24'' (61cm) 60'' (152cm)
STANDARD B-165 SERIES MIRRORS
HW
MODEL
NO.
OVERALL SIZE