Specialized S t ai n l ess St eel K i t ch en an d B at h Ha rd wa re Q u i n ca ill er ie Spécial isé e d e Cu isine e t d e salle d e b ai n e n a c i e r i n o x y d a b l e Model: UM1717, UM2318, UM3019, UM3018, UM3219, UM3219D Stainless Steel Undermount Sink www.boannstyle.
Boann Sink Boann Évier For easy installation of your Boann Sink, please follow: • Read thoroughly all instructions before installing. • • • • • • • Read and understand all warnings care and maintenance. Inspect the sink prior to installation to make sure the sink has not been damaged. Use the cutout template provided by Not recommended to be installed with a laminate countertop. It is recommended to install all Boann products by hiring a licensed professional.
Product Dimension & Parts Dimension et pièces du produit Features: Caractéristiques : Package Contents: Contenu du paquet : • Stainless steel sink with deep depth, tight-radius corners and offset drain • Undermount installation creates a seamless connection with countertop • Perfect workstation accessories Botton grid, Bamboo cutting board, strainer, and drain cap • Fully insulated extra thick pads designed to absorb noise and vibra tion when sink is in use • Limited 5-Year Manufacturer Warranty • • • •
Sink Dimension: Dimension de l'évier: Sink Dimension: Dimension de l'évier: Model: UM1717 17" 9" 15" 17" 15" Sink Dimension: Dimension de l'évier: Model: UM2318 10" 16" 18" 23" 21" 3
Sink Dimension: Dimension de l'évier: Sink Dimension: Dimension de l'évier: Model: TM3019 9 9/20" 28 3/20" Sink Dimension: Dimension de l'évier: Model: UM3018 10" 4 18" 16" 30" 28" 19 7/10" 15 11/20" 14 3/4" 30"
Sink Dimension: Dimension de l'évier: Sink Dimension: Dimension de l'évier: Model: UM3219 32" 10" 16 1/4"" 17" 19" 30" Sink Dimension: Dimension de l'évier: Model: UM3219D 14 2/5" 14 1/2" 14 2/5" 19" 17" 32" 5
Determine Reveal Type Déterminer le type de révélation Installation Options: BOANN Apron sinks offer installation options depending on your design. Use scissors to cut along the line of the paper template for your desired reveal type. Options d'installation: Les éviers à tablier BOANN offrent des options d'installation en fonction de votre conception. Utilisez des ciseaux pour couper le long de la ligne du modèle de papier pour le type de présentatio souhaité.
Undermount Sink Installation Installation d'un évier sous plan 1. Position Template After choosing the Reveal type. Check the cutout template against the actual sink to ensure a properly sized cut-out. Place the cutout template in the desired position and mark it with a pencil. Important: Make sure clearance is suitable for backsplash, faucet, and plumbing for the sink. 1.
Undermount Sink Installation Installation d'un évier sous plan 3. Fasten the mounting brackets Turn countertop over and align sink with countertop. Decide the location for mounting brackets. Mounting holes should be 1/2" from the edge of the sink. Drill 3/8" diameter x 1/2" deep hole in the countertop. 3. Fixez les supports de fixation : Retournez le plan de travail et alignez l'évier avec le plan de travail. Décidez de l'emplacement des supports de fixation.
Undermount Sink Installation Installation d'un évier sous plan Typical Undermount installation with 1/4” to 3/8” reveal recommended. Une installation sous plan typique avec une présentation de 1/4 "à 3/8" po est recommandée. Countertop Plan de travail Silicone Adhesive Adhésif silicone Mounting Clip Clip de montage Fastener (Not furnished) Attache (non fournie) Sink Évier Sink Évier 1/4” to 3/8” Positive Reveal Présentation positive de 1/4 "à 3/8" 5.
Undermount Sink Installation Installation d'un évier sous plan 6. Tighten the fasteners From the underside, lightly tighten the fasteners with a screwdriver until the sink is snug against the countertop. Check alignment of the sink to the countertop opening and then tighten the fasteners until the sink is tight against the countertop. Do not over tighten. Wipe away any excess sillicone adhesive with a rag. 6.
Care & Maintenance Entretien et maintenance • Clean every day by rinsing with mild soap and warm water and wipe dry • Rub lightly with soft cloth in direction of grain lines on a regular basis for additional preventative cleaning • Keep the sink free of any standing water as this can cause buildup of mineral deposits affecting the appearance of the sink • Any stubborn stains should be removed by scrubbing in the direction of the grain with mild abrasive cleaner • Always rinse the sink after using any cleani
Manufacturer Warranty Boann Garantie Du Fabricant All Boann products are manufactured and tested with the highest quality standards and rigorous quality control process. This warranty is limited to the non-commercial use of Boann products purchased and installed in the United States and Canada.
Manufacturer Warranty Boann Garantie Du Fabricant This warranty does not apply to Products that have not been installed or operated in accordance with instructions supplied by Boann and all applicable rules, regulations, and legislation pertaining to such installations. This warranty does not apply to Commercial or Industrial applications of Boann products.
Manufacturer Warranty Boann Garantie Du Fabricant l'installation de votre produit. Les pièces de rechange peuvent être obtenues en appelant 1-855-239-2666 (aux États-Unis et au Canada), par courriel à info@boannstyle.com ou en écrivant à: Boann 382 N.
