Operating Instructions BNR1837 Technical Manual.indd 9/18 BNR1837 Drywall Sanding Machine Please read this manual carefully before using this machine to make sure you are familiar with all safety and warning instructions.
OPERATION INSTRUCTION Machine Call-Outs Please read this manual carefully before using this machine to make sure you are familiar with all safety and warning instructions.
Page | 3
TECHNICAL SPECIFICATIONS Model Number BNR1837 Voltage 120V~, 60Hz Power 5A, 600W Rotation Speed 600-1500 rpm Round Sanding Pad.ø 9” (225mm) Protection class Class II Double Insulated tion while operating power tools may result in serious personal injury. • Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
• Use the power tool, accessories and tool bits etc., in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. 5. SERVICE Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. Contact: BN Products-USA • (800) 992-3833 • mail@bnproducts.
Always use auxiliary handle, if provided, for maximum control over kickback or torque reaction during start-up. The operator can control torque reactions or kickback forces, if proper precautions are taken. AFTER USE b) Never place your hand near the rotating accessory. The accessory may kickback over your hand. Shaft (Fig. 2) • c) Do not position your body in the area where power tool will move if kickback occurs.
• Insert Vacuum hose P into the end of the tool handle as illustrated will wipe out the sandpaper and probably damage the sponge pad as well. • Tighten Locking knob for length adjustment I by turning it in the direction of the locking symbol on the tool handle • Connect the Vacuum hose with the Ø 47 mm adapter P4 directly to an industrial vacuum cleaner (remove vacuum cleaner hose first) MAINTENANCE / SERVICE Store the tool in its protective case in a dry and locked-up place, out of reach of children.
BNR1837 includes sample sanding discs with this Drywall Sander. You can order additional discs using the following part numbers from your local supplier. BN Products Sanding discs for BNR1837. Ø9” (225mm) Sanding discs for BNR1837 Part Number Sanding Grit Package Qty.