Restive Spectral Poser Bisection Hid Ba Suh Wm us a sen aw ime relative intensity Halt fireguard: wavelength (nm) Bison Relative Spacial Power Substitution aan 3 sgl SEO min red relative intensity Bight frequency: wavelength tnd BL200D 4
Hm te Wow He don ou a a Hog BLISS PEED MAP: Sir mosowowonon assn ead Hodge BoB Roo vie DOUBLE PPI MAP Atman moe mm oe moat Era % wow ow ow te Bono om om sw HER 5
Please read and understand all instructions before operate or install the product Te reduce the risk of FIRE OR INQUIRY TO PERSONS: 1. Shut off the electricity to the wires halt you are working on. 2. Do not open or disassemble the LED endure, It contains no serviceable parts inside; Opening noncomplying the LED fixture can be dangerous and will void the warranty. 3. Storage environment: store the LED fading iia dry bandleader environment, with an ambient temperature of -4--180°F (20-8001 « 4.
WARNING: To:avoid the damaging the LED chips; don't touch the LED chips:withyou hands or anything lees during all the processes of opening the package, Installing the fixture and maintaining the figure.
Cable “ug B Rope Shrink Ba" Daley Chain Cord L118 D LED fxture(BL1000) D1236"W 128"H 307" LED admixture) D787 128°H 307" LED fidture(BLI0O0) D203 30MW 10 8%H 5.51" LL soe Lie Take caution when Handling light bars: ensure the LED array doss not come in contact with sharp objects or force that may damage the diodes: {Gently place the fixture an ‘a stable and flush surface. a Double check and make sure all: the joints for the respond are assembled and tightened.
Hang up the fixture and plug the power cord 1o light on Be sure 1o hang from the center of the lance HEINE 10 Sn Sire Barbarized fixture Man Light Other multiple Light Other multiple Light 19
pm {ON/OFF 1 Fs fat : Tl ON/OFF For multiple lights connected together, there Is pe (118") daisy chain cord for connect lights. You will only need fo operate the main light to control all the other lights dilemma & turn on and off. Nagy operation providing great convenience to your planting. = Chooses one roan light and make sure the ON OFF { of the main light is ON: «Turn the dimming knob:an all of the fixtures to "OFF" (ON OFF Except the: main it.
No ght output. 1. Power cord isn't connected properly or connections are loosen. + Check the power cord connections, 2. H you use the LED fixture as a stand alone, the dimmer switch is » Adjust dimmer on OFF mode. switch to 100W to 200W mode, Light burn or light stress {Green plants leaves or tips becoming vet low unnaturally } 1. LED lights are too close to green plants, + Move your LED plants right away, 2.
This product is warranted for 3 years from the date of purchase: If this product does not perform to the specifications supplied on this package; send an email to for product return and replacement. This replacement is the sole remedy available. Liability for incidental or consequential damage is expressly excluded.