SPLIT-TYPE ROOM AIR CONDITIONER Owner’s Manual BM09Y18 BM12Y19 BM18Y19 BM24Y17 IMPORTANT NOTE: Read this manual carefully before installing or operating your new air conditioning unit. Make sure to save this manual for future reference. Please check the applicable models, technical data, F-GAS(if any) and manufacturer information from the “Owner's Manual - Product Fiche ” in the packaging of the outdoor unit.
Table of Contents Owner’s Manual 1 Safety Precautions..................................................................................................03 2 Unit Specifications and Features........................................................................05 1. Indoor unit display ............................................................................................................05 2. Other features .................................................................................................
Safety Precautions Safety Precautions 1 Read Safety Precautions Before Operation and Installation Incorrect installation due to ignoring instructions can cause serious damage or injury. The seriousness of potential damage or injuries is classified as either a WARNING or CAUTION. WARNING CAUTION This symbol indicates that ignoring instructions may cause death or serious injury.
Safety Precautions CLEANING AND MAINTENANCE WARNINGS • Turn off the device and disconnect the power before cleaning. Failure to do so can cause electrical shock. • Do not clean the air conditioner with excessive amounts of water. • Do not clean the air conditioner with combustible cleaning agents. Combustible cleaning agents can cause fire or deformation. • • • • • • • • CAUTION Turn off the air conditioner and disconnect the power if you are not going to use it for a long time.
Unit Specifications and Features 2 Unit Specifications and Features Indoor unit display Power Cable (Some Units ) Front Panel Remote Control Louver Remote Control Holder (Some Units) Functional Filter (On Back of Main Filter - Some Units) Display window (A) (B) (C) “ ” when ECO function is activated(some units) “ ” Lights up in different colour according to the operation mode(some units): Under COOL and DRY mode, it displays as cool colour. Under HEAT mode, it displays as warm colour.
Power Cable (Some Units ) Front Panel Unit Specifications and Features Louver Remote Control Functional Filter (On Back of Main Filter - Some Units) Remote control Holder (Some Units) Display window (E) “ ” when FRESH feature is turned on “ ” when defrosting(cooling & heating units). “ ” when the unit is operational. “ ” when Timer is set.
Unit Specifications and Features A guide on using the infrared remote is not included in this literature package. Not all the functions are available for the air conditioner, please check the indoor display and remote control of the unit you purchased. Other Features • Auto-Restart(some units) If the unit loses power, it will automatically restart with the prior settings once power has been restored.
Normal Operating temperature Inverter Split Type Room Temperature COOL mode HEAT mode DRY mode 17°C - 32°C (63°F - 90°F) 0°C - 30°C (32°F - 86°F) 10°C - 32°C (50°F - 90°F) -15°C - 30°C (5°F - 86°F) 0°C - 50°C (32°F - 122°F) 0°C - 50°C (32°F - 122°F) -15°C - 50°C (5°F - 122°F) Outdoor Temperature (For models with low temp. cooling systems.
• Setting Angle of Air Flow Unit Specifications and Features Setting vertical angle of air flow While the unit is on, use the SWING/DIRECT button on remote control to set the direction (vertical angle) of airflow. Please refer to the Remote Control Manual for details. NOTE ON LOUVER ANGLES When using COOL or DRY mode, do not set louver at too vertical an angle for long periods of time. This can cause water to condense on the louver blade, which will drop on your floor or furnishings.
3 Care and Maintenance Cleaning Your Indoor Unit off excess water. 7. Dry it in a cool, dry place, and refrain from exposing it to direct sunlight. 8. When dry, re-clip the air freshening filter to ALWAYS TURN OFF YOUR AIR CONDITIONER the larger filter, then slide it back into the SYSTEM AND DISCONNECT ITS POWER SUPPLY indoor unit. BEFORE CLEANING OR MAINTENANCE. 9. Close the front panel of the indoor unit. CAUTION Only use a soft, dry cloth to wipe the unit clean.
CAUTION • Before changing the filter or cleaning, turn off the unit and disconnect its power supply. • When removing filter, do not touch metal parts in the unit. The sharp metal edges can cut you. • Do not use water to clean the inside of the indoor unit. This can destroy insulation and cause electrical shock. • Do not expose filter to direct sunlight when drying. This can shrink the filter.
4 Troubleshooting SAFETY PRECAUTIONS If ANY of the following conditions occurs, turn off your unit immediately! • The power cord is damaged or abnormally warm • You smell a burning odor • The unit emits loud or abnormal sounds • A power fuse blows or the circuit breaker frequently trips • Water or other objects fall into or out of the unit DO NOT ATTEMPT TO FIX THESE YOURSELF! CONTACT AN AUTHORIZED SERVICE PROVIDER IMMEDIATELY! Common Issues The following problems are not a malfunction and in most situat
Issue Possible Causes A rushing air sound may occur when the louver resets its position. The indoor unit makes noises A squeaking sound may occur after running the unit in HEAT mode due to expansion and contraction of the unit’s plastic parts. Low hissing sound during operation: This is normal and is caused by refrigerant gas flowing through both indoor and outdoor units.
Troubleshooting When troubles occur, please check the following points before contacting a repair company.
Problem The unit is not working Possible Causes Solution Power failure Wait for the power to be restored The power is turned off Turn on the power The fuse is burned out Replace the fuse Remote control batteries are dead Replace batteries The Unit’s 3-minute protection has been activated Wait three minutes after restarting the unit Timer is activated Turn timer off There’s too much or too little refrigerant in the system Check for leaks and recharge the system with refrigerant.
The design and specifications are subject to change without prior notice for product improvement. Consult with the sales agency or manufacturer for details. Any updates to the manual will be uploaded to the service website, please check for the latest version.
此面无需印刷 技术 要求： 1.80克/平方双胶纸 2.尺寸：A4 3.颜色：黑白 4.注意：排版时注意页码数字都是靠外面的，以便翻阅 5.
