Replacement Part List

Fig. 51 Fig. 52
4. Check the spark plug (20) for damage and wear. The colour of the electrode
should be light-brown colored.
5. Remove debris from the electrode with a soft wired brush; avoid heavy
cleaning of the electrode.
6. Dry the spark plug with a soft cloth, if it is wet from fuel.
7. Check the spark plug gap. It should be 0.6 - 0.7mm (Fig. 53).
Fig. 53
8. Replace with a new spark plug if either the electrode or the insulation is
d
amaged.
9. When replacing the spark plug, first screw it in hand tight and then lightly
tighten it with the multi tool (32).
10. Refit the spark plug connector (19); ensure the rubber pad around the spark
plug connector is in correct position.
WARNING! Do not over tighten the spark plug to avoid any
damage!
0.6 - 0.7mm
19
20
32
1-800-348-5004
[e-mail]
53