Use and Care Manual

Do not use the fan if any parts are damaged or missing.

DO NOT

2. Slide one end of the V shape tube into the end of the fan

tube with the smaller hole.

1. Remove the two screws, lock washers and flat washers

from V shape tube, keep for using later.

3. Slide the other end of the V shape tube into the other end

of the fan tube with the larger hole.

4. Align the screw holes and secure with the screws, lock

washers and flat washers from step 1. (See Figure 1)

Be sure the FRONT and rear GUARD screws are completely tightened

down in the locked position before operating the fan.