Blaze Kamado Rotisserie Manual
Table Of Contents
- USE & CARE GUIDE
- Installing the Rotisserie onto the Grill
- It is a good rule of thumb to check the food on the rotisserie rod after the first 15-20 minutes of cooking as the meat could shift on the rod and need to be readjusted. Always use extreme caution when working around the hot internal parts of the gril...
- Upon completion of cooking, use high heat gloves to remove the rotisserie rod from the grill. Close the top and bottom damper completely to extinguish the fire. Remember it could take several hours for the grill to cool. Do not attempt to clean any pa...
- - Wash and store the rotisserie rod and forks.
- - Remove the rotisserie motor and store in a safe place. Do not leave the rotisserie motor mounted on the grill. Remove the rotisserie motor bracket and store. Replace the rotisserie plug. Replace the optional side shelf if applicable.
- - Remove the rotisserie rod support bracket on the inside of the grill and store.
Blaze Outdoor Products Instructional Book
Page | 9
The rotisserie motor bracket will then mount to the grill body as seen in the below picture. Place the two
openings in the bracket over the already installed hardware in the grill body and slide downwards. Once
installed, add the motor.
Open the grill lid and remove your cooking surface and middle grate. The rotisserie spit rod bracket
mounts to the inside of the grill in the same fashion as the rotisserie motor bracket. This allows a resting
point for the far side of the rotisserie rod to rest on. Install the rotisserie spit rod bracket. See below