User manual

272MP 12X PTZ HD-SDI/HDcctv Dome Camera
SECTION 3: SOFTWARE SETUP  OPERATING GUIDE
3.6 DOME MOTION SETUP menu
To navigate within the menu system:
• p/q: move joystick up and down for selecting an item.
• t/u: move joystick left and right for moving an item.
• u/ [OPEN]/ [NEAR]: move joystick right to select or save values or go to edit pages.
• u/ [CLOSE]/ [FAR]: move joystick to cancel or to exit current menu (back)
3.6.1 GENERAL SETUP menu
This menu control general function of dome. To use this menu:
1. Open the MAIN MENU.
2. Select DOME MOTION SETUP using the joystick [u], then move to GENERAL SETUP using the joystick.
3. Set the POWER-UP ACT option to ON or OFF.
— Power-up action is a function (preset, tour, pattern and scan) to be performed when the power is applied (or re-applied)
or after an alarm action. Set to ON to resume its prior activity.