Instruction manual

_AFETY GUiDELiNES = DEFiNiTiONS
i
ilt is important for you to read and understand this manual. The information it contains
irelates to protecting YOUR SAFETY and PREVENTING PROBLEMS. The symbols
below are used to help you recognize this information.
Z_ DANGER: Indicates an imminently hazardous situation which, if not avoided, will
result in death or serious injury.
/_ WARNING: Indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.
/'_ CAUTION: Indicates a potentially hazardous situation which, if not avoided, may
result in minor or moderate injury.
NOTICE: Used without the safety alert symbol indicates potentially hazardous
situation which, if not avoided, may result in property damage.
General Safety Rules
_WARNING: Read all safety warnings and all instructions. Failure to follow the
warnings and instructions may result in electric shock; fire and/or serious injury.
SAVE ALL WARNINGS AND iNSTRUCTIONS FOR FUTURE REFERENCE
7_hoeterm "power tool" in the warnings refers to your mains-operated
roeo) power [oot or oattery-opera[eo _corotess) power [oot.
1) WORK AREA SAFETY
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
2) ELECTRICAL SAFETY
a) Power tool plugs must match the outlet. Never modify the plug in any
way. Do not use any adapter plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk of electric shock:
b) Avoid body contact with earthed or grounded surfaces such as pipes,
radiators, ranges and refrigerators. There is an increased risk of electric shock
if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a power
tool will increase the risk of electric shock:
d) Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase the risk of electric shock:
e) When operating a power tool outdoors, use an extension cord suitable for
outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric
shock.
f) If operating a power tool in a damp location is unavoidable, use a ground
fault circuit interrupter (GFCl) protected supply. Use of a GFCI reduces the
risk of electric shock:
3) PERSONAL SAFETY
a) Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use a power tool while you are tired or
under the influence of drugs, alcohol or medication. A moment of inattention
while operating power tools may result in serious personal injury.
b) Use personal protective equipment. Always wear eye protection. Protective
equipment such as dust mask; nonskid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce personal injuries.